Instruction/ maintenance manual of the product 13710 Aiphone
Go to page of 17
Aiphone AX Series 13710 (28 13 00) - 1 AX Series Security and Communication System Architectural and Engineering Specifications.
Aiphone AX Series 13710 (28 13 00) - 2.
Aiphone AX Series 13710 (28 13 00) - 3 Aiphone Corporation February 2007 1700 130th Avenue NE Bellevue, Washington 98005 Toll Free (800) 692-0200 Phone (425) 455-0510 Fax (425) 455-0071 Website www.
Aiphone AX Series 13710 (28 13 00) - 4 Specifier Notes: List standards referenced in this section, co mplete with designations and titles. This article does not require compliance with standards, but is merely a listing of those used. A. ISO 9001:2000 – Quality Management Systems – Requirements.
Aiphone AX Series 13710 (28 13 00) - 5 2. Press door station CALL button. 3. Calling tone rings on master station (for normal call, intermittent tremolo sound; for pr iority call, rapid intermittent tremolo sound) and selector button LED for individual door st ation flashes (double-flash for priority call).
Aiphone AX Series 13710 (28 13 00) - 6 2. You can communicate with door station from telephone. 3. You can end communication at telephone. Communication also ends automatically when set talk time limit is reached. About 10 seconds before end of call, you will hear alarm sound on telephone.
Aiphone AX Series 13710 (28 13 00) - 7 I. Monitor: 1. If you press individual door station selector button, you can hear audio and if that door station has a camera, you can see image. 2. Press OFF button to end. Call also ends automatically when set communication end time is reached.
Aiphone AX Series 13710 (28 13 00) - 8 d. Master station to master station communication. e. Normal All Call. f. Monitor. g. Scan monitor. 1.5 SUBMITTALS A. Comply with Section 01330 (01 33 00) – Submittal Procedures. B. Product Data: Submit manufacturer’s product data, including installation instructions.
Aiphone AX Series 13710 (28 13 00) - 9 A. Integrated Security and Communication System: Aiphone “AX Series”. 1. Power Source: a. 24 V DC, 2 A. b. Two PS-2420UL (110 V AC) per video system. One PS-2420UL (110 V AC) per audio system. 2. Door Station Calling: a.
Aiphone AX Series 13710 (28 13 00) - 10 d. Video Output Trigger: 1) Open collector output. 2) 24 V DC, 30 mA. 3) Two RJ-45. Specifier Notes: Include the following when specifying central exchange unit models AX-084C or AX- 248C. e. Master and door stations homerun to CEU for connection and programming.
Aiphone AX Series 13710 (28 13 00) - 11 3. Add-On Exchange Unit: Model AX-320C. a. Connect: Maximum of 32 door stations. b. Current Consumption: 1) Video: 200 mA maximu m. 2) Audio: 180 mA maximu m. c. Power switch. d. Add-on unit ID setting switch. e.
Aiphone AX Series 13710 (28 13 00) - 12 l. RJ-45 jack f or connection to CEU. m. Connector for add-on selector on master station. n. Door call-in indicator. o. Hands-free or push-to-talk communication. p. All Call to master stations. q. Scan monitoring.
Aiphone AX Series 13710 (28 13 00) - 13 d. Camera. e. Camera Protection: Clear Lexan lens cover. f. RJ-45 jack. g. Speaker. h. Microphone. i. Directory card. j. White Illumination LEDs: Automatically turn on in low-light conditions. k. CAT-5e homerun wired to CEU.
Aiphone AX Series 13710 (28 13 00) - 14 f. Camera Protection: Clear Lexan lens cover. g. RJ-45 jack. h. Speaker. i. Microphone. j. Directory card. k. White Illumination LEDs: Automatically turn on in low-light conditions. l. CAT-5e homerun wired to CEU.
Aiphone AX Series 13710 (28 13 00) - 15 Specifier Notes: Specify flush or surface mount. b. [Flush mount in standard 2-gang box] [Surface mount by adding SBX-2G]. 7. CCTV Camera Input Module: Model AXW-AZ. a. Converts standard CCTV camera’s signal to CAT-5e connection, providing signal compatible with AX system .
Aiphone AX Series 13710 (28 13 00) - 16 B. Notify Architect of conditions that would adversely affect installation or subsequent u se. C. Do not begin installation until unacceptable conditions are corrected.
Aiphone AX Series 13710 (28 13 00) - 17 A. Adjust integrated security and communication system for proper operatio n in accordance with manufacturer’s instructions. 3.4 DEMONSTRATION AND TRAINI NG A. Demonstration: 1. Demonstrate that integrated security and communication system functions properly.
An important point after buying a device Aiphone 13710 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiphone 13710 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiphone 13710 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiphone 13710 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiphone 13710 will certainly help you make a decision on the purchase.
If you already are a holder of Aiphone 13710, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiphone 13710.
However, one of the most important roles played by the user manual is to help in solving problems with Aiphone 13710. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiphone 13710 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
