Instruction/ maintenance manual of the product AP717 Cuno
Go to page of 2
INSTALLATION & OPERATING INSTRUCTIONS FOR Aqua-Pure® Ice Maker Ice Filters come complete with all the necessary hardware. All you need is a tube cutter, a wrench and a knife. Simply follow the easy step-by-step instructions inside the box to connect the Aqua-Pure Ice Maker Water Filter to your refrigerator’s incoming cold water line.
5. Apply one or two turns of Teflon ® t ape to thread of brass fittings. Thread fittings into port of filter body. Tighten fittings snugly, but DO NOT OVER TIGHTEN. 6. Connect the inlet port of the filter to the incoming water line following steps 7&8.
An important point after buying a device Cuno AP717 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cuno AP717 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cuno AP717 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cuno AP717 you will learn all the available features of the product, as well as information on its operation. The information that you get Cuno AP717 will certainly help you make a decision on the purchase.
If you already are a holder of Cuno AP717, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cuno AP717.
However, one of the most important roles played by the user manual is to help in solving problems with Cuno AP717. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cuno AP717 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center