Instruction/ maintenance manual of the product RR 5200S Series Crown Equipment
Go to page of 22
This operator manual has information for all models of RR5000S series plus some options and accessories. Some of the illustrations and information may not apply to your truck. N ew Bremen, Ohio 45869 USA © 2001 PF12905 -WEB Rev. 6/06 Printed in U.S.A.
Y ou Must be T r ained Y ou could be killed or seriously injured if you are not adequately trained for lift truck operation! Do not operate this truck in your w ork place until you hav e been trained and certif ied by your employer .
Know the Hazar ds Pr otect Y ourself 3 Protect Y ourself LOOK WHERE Y OU'RE DRIVING • Always be alert to the area around you and w atch where you are dri ving. Y ou could be pinned or crushed by objects intruding or poking into the operator area.
W hat's in it for Y ou? 6 What's in it for Y ou? QUICK LOCA TORS In addition to the "Contents" page you can use page headings to find topics. Some pages also hav e a picture of the truck in the corner sho wing features or functions cov ered on that page.
NARROW -AISLE TRUCKS Y our narro w-aisle rider truck lifts, mo ves and stacks loads. It is designed to work in warehouses b uilt with narrower aisles to gi ve maximum storage. Y OUR LIFT TRUCK IS NOT AN AUT OMOBILE W ith a load it may weigh more than 3 automobiles.
Mast Overhead Guard Load Backrest Operator Cushion Flip-Down P erch Folding Seat (on some models) Battery Fork Load Wheels Drive Wheel Caster Wheel Lift T ruck P arts 9 Lift T ruck P arts P ower Disco.
Know the Hazar ds KNOW Y OUR LOAD Do not exceed the capacity sho wn on your truck's capacity plate. Be careful when handling long, high or wide loads. Do not handle unstable loads. EXCEEDING TRUCK CAP ACITY CAN CAUSE AN A CCIDENT Kno w the capacity of your truck as shown on your capacity plate.
Capacity Plate 13 Capacity Plate SAMPLE CAP ACITY PLA TE The information sho wn on this sample plate does not apply to your truck. A B CAUTION Y ou may not increase capacity if load center is less than shown on your capacity plate. Note: ANSI B56.1 requires that all data be shown first in Metric units and then USA units.
Displa y P anel with options 16 Displa y P anel with options FORKS DOWN LIGHT (see Caution) The green light means the mast is at its minimum collapsed height.
- --- MESSAGE DISPLA Y FOR ST ANDARD TRUCK If your truck slows down or won't work, check the message display for instructions. Displa y P anel Messages AUDIO ALARM Anytime you hear a "beep", something is wrong. Check the message display .
19 Adjusting the Seat & Controls ADJUSTING THE STEERING TILLER HEIGHT Push the yellow button to the right of the steering column, and move the steering tiller to the most comfortable operating position.
P ower On & Off 22 P ower On & Off 21 P ower On & Off KEY SWITCH • T o start the truck, turn the ke y clockwise to TEST (yellow dot). Check that all display lights are working. • Let go of the ke y and it will return to ON (green dot).
Foot Br ak e BRAKE OFF Step all the way do wn on either the floor brake pedal or the left pedestal brake pedal. The brakes are now "off". BRAKE ON • Floor Brak e P edal When operating with both feet on the floorboard, lift your heel or move your foot off the floor brake pedal to apply the brakes.
T r a veling & Plugging TRA VEL, POWER UNIT FIRST Pull the multi-task handle to ward you to trav el in the direction of the po wer unit (po wer unit first). The farther you pull the handle from the neutral position, the faster the truck will travel.
T wo T ypes of Steering 28 1 REAR DIRECTIONAL STEERING (Sometimes called Reverse Steering.) Shows direction truck will turn when steering handle is turned clockwise.
Fork Functions 29 Fork Functions RAISE/LOWER Lift the multi-task handle up to raise the forks. Push down on the handle to lower the forks. The farther you move the multi-task handle from neutral, the faster the forks will move.
REACH/RETRA CT Roll the thumb ball away from you to reach (extend) the forks. Roll the ball toward you to retract the forks. The farther you move the ball from neutral the faster the forks will move. This motion of the thumb ball will have a second function if your truck has a sideshift option.
2. T est drive your truck in an uncongested ar ea. • T ry all the hydraulic functions. • Check that the steering is easy and smooth. • Drive the truck slowly in both directions. • Dri ve through the full speed range in both forw ard and re verse.
Be a Safe Driver 35 Be a Safe Driver MAKE SURE Y OU ARE READ Y TO DRIVE • Do not use this truck unless you are trained and certified. • Be certain you understand ho w your truck works and the hazards that go with it. Don't drive the truck if you have any doubts.
Be a Safe Driver continued 38 A VOID F ALLS AND TIPOVERS • Stay away from the edge of docks and ramps. • Check that bridgeplates and dockboards are secure. Be certain that either the trailer wheels are chocked or the trailer is locked to the dock.
B attery Maintenance 39 Battery Maintenance WHEN Y OU INST ALL OR CHANGE BA TTERIES • T urn the truck OFF . Disconnect the battery . Check that all controls are in neutral. • Make certain you use the correct size and weight battery . Ne ver operate a truck that has an underweight or undersized battery installed.
Notes 41 Notes W AR N I G N 169 Connect charger properly or truck can be damaged. Make certain charger is plugged into the battery connector , not the truck connector . Stay clear of all moving parts. Moving parts can cut or crush hands, feet, arms or legs.
An important point after buying a device Crown Equipment RR 5200S Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crown Equipment RR 5200S Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crown Equipment RR 5200S Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crown Equipment RR 5200S Series you will learn all the available features of the product, as well as information on its operation. The information that you get Crown Equipment RR 5200S Series will certainly help you make a decision on the purchase.
If you already are a holder of Crown Equipment RR 5200S Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crown Equipment RR 5200S Series.
However, one of the most important roles played by the user manual is to help in solving problems with Crown Equipment RR 5200S Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crown Equipment RR 5200S Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
