Instruction/ maintenance manual of the product PR 4500 Series Crown Equipment
Go to page of 6
C Specifications PR 4500 Series Rider Pallet Truck PR 4500 Series.
9.25" 3.5" 9.5" 4.5" 4.5" 3.25" 11.7 " 23.3" – 84" Forks 32.6" – 93" Forks 35.3" – 96" Forks 22.0" – 84" Forks 31.3" – 93" Forks 34.0" – 96" Forks 38 " Battery roller to floor 6.
PR 4500 Series Specifications PR 4500 Series Standard Tip Forks Extended Tip Forks Nominal Fork Length in 36 42 48 54 60 96 84 93 96 11 Actual Fork Length in 35.75 41.75 47.75 53.75 59.75 95.75 83.75 93 95.75 12 Overall Length in 80.50 86.50 92.50 98.
< = less than or equal to, > = greater than PR 4500 Series Technical Information Maximum Battery Size 13.19" wide x 31.12" long x 31.62" high Batteries 24 volt–750 amp hour–15.2 KwH Min/Max weight 975/1500 lb Standard Equipment 1.
A A B DD C C First Opening Second Opening PR 4500 Series Technical Information Fork Assembly Fork width - 9.12" on standard-tip fork models, 10" on extended-tip fork models. Fork spread - 22" and 27" on standard-tip models. 23" - 26" spread available in one inch increments.
Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Crown logo, the color beige, the Momentum symbol, Access 1 2 3, InfoLink, InfoPoint, e-GEN, and Work Assist are trademarks of Crown Equipment Corporation.
An important point after buying a device Crown Equipment PR 4500 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crown Equipment PR 4500 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crown Equipment PR 4500 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crown Equipment PR 4500 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Crown Equipment PR 4500 Series will certainly help you make a decision on the purchase.
If you already are a holder of Crown Equipment PR 4500 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crown Equipment PR 4500 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Crown Equipment PR 4500 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crown Equipment PR 4500 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
