Instruction/ maintenance manual of the product PE 4000 Series Crown Equipment
Go to page of 6
C Specifications PE 4000 Series End Control Pallet Truck PE 4000 Series.
C 15 11 11 14 13 12 10 16 16 4.5" 6" 9.25" 3.25" 4.5" 9.75" 3.75" 9" 9.12" 7.3" 10" 23.3" – 84" Forks 32.6" – 93" Forks 35.3" – 96" Forks 22.0" – 84" Forks 31.
Specifications PE 4000 Series PE 4000 Series Standard-Tip Forks Extended-Tip Forks Nominal Fork Length in 36 42 48 54 60 96 84 93 96 11 Actual Fork Length in 35.75 41.75 47.75 53.75 59.75 95.75 83.75 93 95.75 12 Overall Length Option 1 in 72.44 78.44 84.
PE 4000 Series Technical Information Maximum Battery Size Option 1 - 6.69" wide x 34.44" long x 31.62" high Option 2 - 13.19" wide x 31.12" long x 31.62" high Batteries Option 1 - 24-volt, 330 amp hour, 7.7 Kwh Min/Max weight 360/900 lb Option 2 - 24-volt, 930 amp hour, 21.
Drive Unit All gear drive from drive motor to drive wheel axle. Drive tire axle is mounted in the drive unit on both sides for maximum strength in rough floor or docking applica- tions. Drive unit is top and bottom mounted. Top mount is a large, tapered roller bearing for vertical or horizontal forces.
C Crown Equipment Corporation New Bremen, Ohio 45869 USA Tel 419-629-2311 Fax 419-629-3796 crown.com Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Momentum symbol, InfoPoint, Quick Coast and QuickPick are trademarks of Crown Equipment Corporation.
An important point after buying a device Crown Equipment PE 4000 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crown Equipment PE 4000 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crown Equipment PE 4000 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crown Equipment PE 4000 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Crown Equipment PE 4000 Series will certainly help you make a decision on the purchase.
If you already are a holder of Crown Equipment PE 4000 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crown Equipment PE 4000 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Crown Equipment PE 4000 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crown Equipment PE 4000 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
