Instruction/ maintenance manual of the product PC 4500 Series Crown Equipment
Go to page of 6
C Specifications PC 4500 Series Center Control Pallet Truck PC 4500 Series.
11 11 14 13 12 10 16 16 4.5" 6" 9.25" 3.25" 4.5" 9.5" 3.5" 9" 9.12" 7.3" 10" 23.3" – 84" Forks 32.6" – 93" Forks 35.3" – 96" Forks 22.0" – 84" Forks 31.
PC 4500 Series Specifications PC 4500 Series Standard-Tip Forks Extended-Tip Forks Nominal Fork Length in 36 42 48 54 60 96 84 93 96 11 Actual Fork Length in 35.75 41.75 47.75 53.75 59.75 95.75 83.75 93 95.75 12 Overall Length in 93.06 99.06 105.06 111.
PC 4500 Series Technical Information When the high speed pedal is engaged, it is approximately flush with the platform cushion for maximum comfort. A large back cushion and mold- ed urethane platform cushion are standard to minimize fatigue when the operator is in transport position.
PC 4500 Series Technical Information Hydraulics Heavy-duty pump, motor, reservoir and control are assembled into one unit. A centrally located lift cylinder, mounted vertically, is equipped with long-life polyurethane packings. A pressure compensating flow control valve is an integral part of the valve block and regulates lowering speed.
C Crown Equipment Corporation New Bremen, Ohio 45869 USA Tel 419-629-2311 Fax 419-629-3796 crown.com Because Crown is continually improving its products, specifications are subject to change without notice.
An important point after buying a device Crown Equipment PC 4500 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crown Equipment PC 4500 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crown Equipment PC 4500 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crown Equipment PC 4500 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Crown Equipment PC 4500 Series will certainly help you make a decision on the purchase.
If you already are a holder of Crown Equipment PC 4500 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crown Equipment PC 4500 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Crown Equipment PC 4500 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crown Equipment PC 4500 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
