Instruction/ maintenance manual of the product TPS-IMPC Crestron
Go to page of 20
Crestron TPS-IMPC Interface Module Operations Guide.
This document was prepared and written by th e Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of th eir respective owners.
Crestron TPS-IMPC Interface Module Contents Interface Module: TPS-IMPC 1 Introduction ...................................................................................... 1 Features & Functions ...................................................
.
Crestron TPS-IMPC Interface Module Interface Module: TPS-IMPC Introduction Features & Functions The TPS-IMPC is an interface modul e designed for, and included with the Crestron TPS-3000, TPS-5000, and TPS- 6000 tilt touchpanels.
Interface Module Crestron TPS-IMPC Physical Description The TPS-IMPC, shown in the following diagram, is supplied with the TPS-3000, TPS-5000, and TPS-6000 ti lt touchpanels.
Crestron TPS-IMPC Interface Module NTSC/PAL VIDEO The NTSC/PAL video input consists of three connectors; two BNC connectors for unbalanced video signals and one 6-pin mini-connector for twisted pair wiring of balanced video signals.
Interface Module Crestron TPS-IMPC CAUTION: If power is provided to the TPS-IMPC from the +24VDC on a Cresnet connector or the PW-2420RU, power must not be applied to the power input on the touchpanel base.
Crestron TPS-IMPC Interface Module CAUTION: The 10-pin RJ-45 net/video connector cable supplied by Crestron is a custom cable and is th e only one that should be used. The end of the cable has a metal shield that is required to protect the equipment. Using non-Crestron cables will result in damage to the product.
Interface Module Crestron TPS-IMPC AUDIO INPUT Pinouts PIN DESCRIPTION S Shield R + Right Positive R - Right Negative L + Left Positive L- Left Negative S Shield MIC OUT The port mates with a three-pin connector (supplied) and produces line level differential output.
Crestron TPS-IMPC Interface Module Industry Compliance As of the date of manufacture, the TPS-IMPC has been tested and found to comply with specifications for CE marking and st andards per EMC and Radiocommunications Comp liance Labelling (N11785). Setup Network Wiring CAUTION: Use only Crestron power supplies for Crestron equipment.
Interface Module Crestron TPS-IMPC must be taken into consideration. If network units are to be daisy-chained on the run, the power factor of each network unit to be daisy-chained must be added together to determine the power factor of the entire chain.
Crestron TPS-IMPC Interface Module TPS-5000 or TPS-6000 touchpanel a nd a video window object resides on a page within the uploaded Crestron VisionTools ® Pro-e (VT Pro-e) project. NOTE: When connecting the net/video cable from the interface module to the touchpanel, exceeding a cable length of 30 feet will significantly degrade the video signal.
Interface Module Crestron TPS-IMPC Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-IMPC Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Touchpanel is not receiving power.
Crestron TPS-IMPC Interface Module TPS-IMPC Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Incorrect video format selection. Select the proper video input configuration in the touchpanel configuration SETUP MENU. Incorrect VT Pro-e project file loaded.
Interface Module Crestron TPS-IMPC Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the TPS-IMPC, additi onal information may be made available as manual updates.
Crestron TPS-IMPC Interface Module Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise may be returned for cr e dit, exchange, or service without prior authorization from CRESTRON.
Interface Module Crestron TPS-IMPC 14 • Interface Module: TPS-IMPC Operations Guide - DOC. 6162 This page intenti onally left blank..
Crestron TPS-IMPC Interface Module Operations Guide - DOC. 6162 Interface Module: TPS-IMPC • 15 This page intenti onally left blank..
Crestron Electronics, Inc. Op erations Guide - DOC. 6162 15 Volvo Drive Rockleigh, NJ 07647 06.03 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.
An important point after buying a device Crestron TPS-IMPC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron TPS-IMPC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron TPS-IMPC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron TPS-IMPC you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron TPS-IMPC will certainly help you make a decision on the purchase.
If you already are a holder of Crestron TPS-IMPC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron TPS-IMPC.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron TPS-IMPC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron TPS-IMPC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
