Instruction/ maintenance manual of the product Pre-Construction Wall Mount Back Box BB-6X-DSW Crestron
Go to page of 16
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box for TPS-6X-DSW Installation Guide.
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, pr oduct names and tradem arks are the proper ty of their respective owners.
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Contents Pre-Construction Wall Mount Back Box: BB-6X-DSW 1 Description.................................................................................................................... ........
.
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Pre-Construction Wall Mount Back Box: BB-6X-DSW Description The Crestron ® BB-6X-DSW back box provides a UL ® -listed, recess-m ounted steel enclosure for the TPS-6X-DSW Wall Mount Docking Stati on.
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW The mounted view of the BB-6X-DSW is shown in the following illustration. BB-6X-DSW Mounted View (Op tional Cover Plate Attached) 2 • Pre-Construction Wall Mount Back Box: BB-6X-DSW Installation Guide – DOC.
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box The dimensions of the BB-6X-DSW are shown in th e following illustration . BB-6X-DSW Overall Dime nsions (Front View) 12.00 in (30.46 cm) 6.35 in (16.13 cm) 8.88 in (22.54 cm) 9.06 in (23.01 cm) 8.
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW BB-6X-DSW Overall Dime nsions (Bottom View) 3.25 in (8.25 cm) 10.50 in (26.65 cm) 3.31 in (8.41 cm) 1.50 in (3.81 cm) NOTE: Knockout holes are intended for Class 2 wiri ng only and are ½” and ¾” diameter.
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Setup Assembly Required Tools: • #2 Phillips tip screwdriver The back box mounting encl osure comes fully assembled except for a grounding screw. To prepare for mounting, com plete the foll owing procedure: 1.
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW Mounting the Back Box ENSURE THESE SURFACES ARE FLUSH BACK BOX MOUNT ING ENCLOSURE ASSEMBLY (4507462) NOTE: BE SURE THE ASSEMBLY IS LEVEL WHEN MOUNTED.
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Mounted View with Cover Plate (Mou nting Example Prior to Drywall Installation) NOTE: BACK BOX IS TO BE COVERED WITH DRYWALL AND THEN THE CUTOUT MADE AROUND THE INSIDE OF THE OPE NING. BE SURE TO LEAVE THE FOUR TAPPED HOLES ON THE FRONT OF THE BOX EXPOSED TO ACCEPT THE MOUNTING SCREWS.
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW Mounting TPS-6X-DSW Docking Assembly an d BB-6X-DSW Back Box – Exploded View TPS-6X-DSW DRYWALL BB-6X-DSW SCREWS (4) #06-32 x 1½ " PAN, .
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Resources Industry Compliance This product is Listed to appl icable UL Standards and requirem ents by Underwrite rs Laboratories Inc.
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise m ay be returned for credit, exchange or service without prior authori zation from CRESTR ON. To obtain warranty service for CR ESTRON products, contact an authorized CRESTRON dealer.
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box This page is intention ally left blank. Installation Guide – DOC. 6728A Pre-Cons truction Wall Mount Back Box: BB-6X-DSW • 11.
Crestron Electronics, Inc. Installation Guide – DOC. 6728A 15 Volvo Drive Rockleigh, NJ 07647 (2021897) Tel: 888.CREST RON 12.08 Fax: 201.76 7.7576 Specif ications subject to www.
An important point after buying a device Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW will certainly help you make a decision on the purchase.
If you already are a holder of Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron Pre-Construction Wall Mount Back Box BB-6X-DSW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
