Instruction/ maintenance manual of the product Four-Way Amplified Splitter SRD-SPL-4 Crestron
Go to page of 12
Crestron SRD-SPL-4 Four-Way Amplified Splitter Installation Guide.
This document was prepared and written by th e Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand nam es, product names and trade marks are the property of t heir respective ow ners.
Crestron SRD-SPL-4 Four-Way Amplified Splitter Contents Four-Way Amplified Splitter: S RD-SPL-4 1 Introduc tion ................................................................................................................... ............. 1 Block Diagram .
.
Crestron SRD-SPL-4 Four-Way Amplified Splitter Four-Way Amplified Splitter: SRD-SPL-4 Introduction The SRD-SPL-4 is a high quality am plified splitter optimized to split a single antenna signal to feed up to four satellite radio tuners as part of a Crestron ® XM or SIRIUS ® satellite radio distribution network.
Four-Way Amplified Splitter Crestron SRD-SPL-4 Block Diagram The following diagram illustrates a typical application using the SRD-SPL-4 splitter. SRD-SPL-4 Block Diagram Specifications Following are specifications for the SRD-SPL-4. SRD-SPL-4 Specifications SPECIFICATION DETAILS Splitter gain @ 2.
Crestron SRD-SPL-4 Four-Way Amplified Splitter SRD-SPL-4 Specifications (Continued) SPECIFICATION DETAILS Humidity 0% to 98% RH (non-condensing) Overall dimensions: Height Width Depth 0.88 in (2.24 cm) 3.75 in (9.53 cm) 2.82 in (7.17 cm) Included Items The items included in the SRD-SPL -4 are listed and shown below.
Four-Way Amplified Splitter Crestron SRD-SPL-4 Industry Compliance As of the date of manufacture, the SRD-SPL-4 has been tested and found to comply with specifications for CE marking and st andards per EMC and Radiocommunications Compliance Labelling.
Crestron SRD-SPL-4 Four-Way Amplified Splitter Problem Solving Troubleshooting The table after this paragraph pr ovides corrective action for possible trouble situations. If further assist ance is required, please contact a Crestron customer service representative.
Four-Way Amplified Splitter Crestron SRD-SPL-4 SRD-SPL-4 Installation Troubleshooting (Continued) TROUBLE POSSIBLE CAUSES CORRECTIVE ACTION Limited reception or channels available for XM and/or SIRIUS tuners. Problem with tuner card. Ensure that the tuner card is registered/activated.
Crestron SRD-SPL-4 Four-Way Amplified Splitter Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise m ay be returned for cr edit, exchange or service without prio r authorizatio n from C RESTRON. To obtain warranty se rvice for CRESTRON products, contact an authorized CRESTRON dealer.
Crestron Electronics, Inc. Inst allation Guide – DOC. 6727A 15 Volvo Drive Rockleigh, NJ 07647 (2021581) Tel: 888.CRESTRON 08.08 Fax: 201.767.7576 Specifications subject to www.
An important point after buying a device Crestron Four-Way Amplified Splitter SRD-SPL-4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron Four-Way Amplified Splitter SRD-SPL-4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron Four-Way Amplified Splitter SRD-SPL-4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron Four-Way Amplified Splitter SRD-SPL-4 you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron Four-Way Amplified Splitter SRD-SPL-4 will certainly help you make a decision on the purchase.
If you already are a holder of Crestron Four-Way Amplified Splitter SRD-SPL-4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron Four-Way Amplified Splitter SRD-SPL-4.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron Four-Way Amplified Splitter SRD-SPL-4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron Four-Way Amplified Splitter SRD-SPL-4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
