Instruction/ maintenance manual of the product CLS-C6 Crestron electronic
Go to page of 12
Crestron CLS-C6 Series iLux ™ Integrated Lighting Systems User Guide ..
Contents iLux ™ Integrated Lighting Systems: CLS-C6 Series 1 Introduc tion................................................................................................................... ............. 1 Operating Modes............................
Crestron CLS-C6 Series iLux ™ Integrated Lighting Systems iLux ™ Integrated Lighting Systems: CLS-C6 Series Introduction The CLS-C6 series of iL ux ™ units are c omplete, integrat ed wall-m ounted lighti ng systems that can function as standal one devic es and/or be pa rt of a Crestron ® solution total control system network.
iLux ™ Integrated Lighting Systems Crestron CLS-C6 Series CLS-C6 Model Definition Model Power Requirements Motion Control System Integration Designation 120 VAC 230 VAC Detector 2 Cresnet ® 1 Cresn.
Crestron CLS-C6 Series iLux ™ Integrated Lighting Systems CLS -C6 Controls & Indicators The table on t he following pa ge describes th e function of th e iLux unit’s c ontrols and indicators, w hich are listed i n alphabetical order .
iLux ™ Integrated Lighting Systems Crestron CLS-C6 Series CLS-C6 Controls & Indicators Descriptions (Continued) CONTROLS & INDICATORS DESCRIPTION ON Button The ON button always recalls the On scene. (Refer to “Standard Mode” on pag e 5.) ^, v, Save, and Cancel Pushbuttons and LEDs Use these pushbuttons when changing scene presets.
Crestron CLS-C6 Series iLux ™ Integrated Lighting Systems Operating Modes After installation, the CLS-C6 operates in one of three modes: • Standar d mode : this is the default mode; buttons are typically used to recall scenes, although they can be reprogrammed by the dealer for other functions.
iLux ™ Integrated Lighting Systems Crestron CLS-C6 Series To exit Lights mode, press the Lights butto n again, or pre ss Cancel . The LED will go off, and the unit will revert to Standa rd mode. Shades Mode Shades mode allows you to manually adju st any of the six shade groups.
Crestron CLS-C6 Series iLux ™ Integrated Lighting Systems Changing Scene Presets The CLS-C6 scene settings can be modified using the front p anel controls, without having to use a PC. Changes to the ligh ting load levels and shad e presets for one or more scenes can be accomplished as follows: 1.
iLux ™ Integrated Lighting Systems Crestron CLS-C6 Series 12. To adjust the fade tim e, press the ^ and v buttons. Whe n going up, the value will go from 0 seconds to 59 seconds, and then 1 minute to 99 minutes. When going down, the valu e will go from 99 minutes to 1 minute, and then 59 seconds to 0 seconds.
Crestron CLS-C6 Series iLux ™ Integrated Lighting Systems Problem Solving Troubleshooting The table belo w provides co rrective action for possible trouble situations.
Crestron Electronics, Inc. User Guide - DOC. 6395B 15 Volvo Drive Rockleigh, NJ 07647 (2014521) Tel: 888.CRESTRON 06.08 Fax: 201.767.7576 Specifications subject to www.
An important point after buying a device Crestron electronic CLS-C6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron electronic CLS-C6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron electronic CLS-C6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron electronic CLS-C6 you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron electronic CLS-C6 will certainly help you make a decision on the purchase.
If you already are a holder of Crestron electronic CLS-C6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron electronic CLS-C6.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron electronic CLS-C6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron electronic CLS-C6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
