Instruction/ maintenance manual of the product CEN-SW-POE-5 Crestron electronic
Go to page of 24
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Installation Guide.
This document was prepared and written by th e Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand nam es, product names and trade marks are the property of t heir respective ow ners.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Contents 5-Port Power over Ethernet Switch: CEN-SW-POE-5 1 Introduction ...........................................................................................................................
.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch 5-Port Power over Ethernet Switch: CEN-SW-POE-5 Introduction The CEN-SW-POE-5 is a five-port unm anaged Ethernet switch designed to provide standards-based IEEE 802.3af Power over Ethernet (PoE) capability from four ports.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Features and Functions • Four 10BaseT/100BaseTX 802.3af PoE ports • One 10BaseT/100BaseTX uplink port • Autonegotiation of data transm ission rate and duplex mode • Auto MDI/MDI-X (Mediu m Dependent Interface/Medium Dependent Interface Crossover) operation • 3.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Specifications Specifications for the CEN-SW-POE-5 are listed in the following table. CEN-SW-POE-5 Specifications SPECIFICATION DETAILS Ethernet 10BaseT/100BaseTX, auto- switching, auto-negotiating, auto- discovery, full/half duplex; TCP/IP, UDP/IP, DHCP, IGMP; IEEE 802.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Physical Description This section provides information on the connections and indicators available on your CEN-SW-POE-5. CEN-SW-POE-5 Physical View 4 • 5-Port Power over Ethernet Switch: CEN-SW-POE-5 Installation Guide – DOC.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch CEN-SW-POE-5 Overall Dimensions Front View 5.06 in (12.86 cm ) 3.62 in (9.18 cm) Bottom View 4.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 CEN-SW-POE-5 Connectors & Indicators 2 1 3 4 5 6 • 5-Port Power over Ethernet Switch: CEN-SW-POE-5 Installation Guide – DOC.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Connectors & Indicators # CONNECTORS & INDICATORS DESCRIPTION 1 Uplink AMBER LED GREEN LED 8 1 (1) 8-wire RJ-45 connector with 2 LED ind.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Connectors & Indicators (Continued) # CONNECTORS & INDICATORS DESCRIPTION 3 PoE (1-4) AMBER LED GREEN LED AMBER LED GREEN LED 8 1 8 1 (4.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Connectors & Indicators (Continued) # CONNECTORS & INDICATORS DESCRIPTION 4 48VDC 1 2 3 4 (1) 4-pin power connecto r, 48 VDC power input (external power supply included).
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Industry Compliance This product is Listed to applicab le UL Standards and requirements by Underwriters Laboratories Inc.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Setup Network Wiring When wiring the Ethernet network, use Category 5 (CAT5) wiring. CAT5 wiring is a twisted pair cable designed for Ethernet networks. These networks operate at speeds of up to 100 Megabits per second (Mbps) using the 100BaseT standard.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Installation Ventilation The CEN-SW-POE-5 venting holes s hould not be obstructed under any circumstances. To prevent overheating, do not operate this product in an area that exceeds the environmental te mperature range listed in the table of specifications.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Wall Mounting The CEN-SW-POE-5 can be mounted to a wall. To mount the device to a wall, use the four supplied 3/16 x 1-1/4” pan head Phillips drywall screws (refer to the illustration below). Wall Mounting (4 ) S c r e w s, 3/ 16 x 1¼” Phillips P an Head Installation Guide – DOC.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Apply power after all connections have been made. When making connections to the CEN-SW-POE-5, note the following: • Use Crestron power supplies for Crestron equipment.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 CEN-SW-POE-5 Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Network cable is not the proper length. Verify that network cable is the proper length. Cable length must not exceed 328 feet (100 meters).
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch Reference Documents The latest version of a ll documents mentioned w ithin the guide can be obtained from the Crestron website ( www.crestron.com/manuals ). This link will provide a list of product ma nuals arranged in alphabetical order by model number.
5-Port Power over Ethernet Switch Crestron CEN-SW-POE-5 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be ret urned for credit , exchange or service with out prior authorization from CR ESTRON. To obt ain warranty serv ice for CREST RON products, contact an authorized CRESTRON deal er.
Crestron CEN-SW-POE-5 5-Port Power over Ethernet Switch This page is intentionally left blank. Installation Guide – DOC. 6694A 5-Port Power over Ethernet Switch: CEN-SW-POE-5 • 19.
Crestron Electronics, Inc. Inst allation Guide – DOC. 6694A 15 Volvo Drive Rockleigh, NJ 07647 (2021172) Tel: 888.CRESTRON 08.08 Fax: 201.767.7576 Specifications subject to www.
An important point after buying a device Crestron electronic CEN-SW-POE-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron electronic CEN-SW-POE-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron electronic CEN-SW-POE-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron electronic CEN-SW-POE-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron electronic CEN-SW-POE-5 will certainly help you make a decision on the purchase.
If you already are a holder of Crestron electronic CEN-SW-POE-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron electronic CEN-SW-POE-5.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron electronic CEN-SW-POE-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron electronic CEN-SW-POE-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
