Instruction/ maintenance manual of the product C2N-SPWS300 Crestron
Go to page of 32
Crestron C2N-SPWS300 System Power Supply Operations Guide.
This document was prepared and written by th e Technical Docum entation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product nam es and trademar ks are the property of their respective owners.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 Contents • i Contents System Power Supply: C2N-SPWS300 1 Introduction............................................................................................................
.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 1 System Power Supply: C2N-SPWS300 Introduction Features and Functions The C2N-SP WS300 is a 300 -watt system power sup ply designe d for large Cresnet control systems (herein referred to as C resne t system ).
System Power Supply Crestron C2N-SPWS300 2 • System Power Supply: C2N-SPWS300 Operations Guide - DOC. 8190 Powering the Unit NOTE: The C2N-SPWS300 is shipped with tw o power cable assemblies. One is supplied for standard 12 0 VAC, 60 Hz as availabl e in the Unite d States.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 3 Pressing a RESET button d uring norm al operations shuts off a c hannel f or as long as the button is held down. If the button is released, the channel turns on.
System Power Supply Crestron C2N-SPWS300 4 • System Power Supply: C2N-SPWS300 Operations Guide - DOC. 8190 Physical Description The C2N-SP WS300, show n after this paragraph, i s housed in a sturdy 1/ 8-inch bl ack anodized alum inum enclos ure.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 5 C2N-SPWS300 Physical Views 12.75 in (32.
System Power Supply Crestron C2N-SPWS300 6 • System Power Supply: C2N-SPWS300 Operations Guide - DOC. 8190 SETUP LED and Pushbutton The C2N-SPWS300 is TSID ready.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 7 Network Wiring CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so coul d cause equi pment dam age or void t he Crestron warranty.
System Power Supply Crestron C2N-SPWS300 8 • System Power Supply: C2N-SPWS300 Operations Guide - DOC. 8190 Identity Code NOTE: The C2N-SPWS300 can be polled in Cresnet while the power switch is in either position as long as the appro priate da ta signal (Y & Z) connections are made to any of the 17 NET conn ectors on the power supply.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 9 7. Clic k Set ID to initiate the change. This will display th e "ID command has been sent" window. 8. In the "Command Complete" window, click OK .
System Power Supply Crestron C2N-SPWS300 10 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 is simil ar to the repo rt produc ed by pressi ng F4 (Report Network Devices); the first eight digits of each line constitute th e TSID number (hexadecimal form of the serial num ber).
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 11 Rack Mounting WARNING: To prevent bodily injury when mountin g or servicing this unit in a rack, take special preca utions to ensure th at the system remains stable.
System Power Supply Crestron C2N-SPWS300 12 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 C2N-SPWS300 (PWR ON Position), Hardware Hookup NETWORK DA T A LINK TO ADDITIONAL EXP ANSI.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 13 C2N-SPWS300 (PWR OFF SLAVE Po sition), Hardware Hookup NETWORK DAT A LINK TO ADDITIONAL.
System Power Supply Crestron C2N-SPWS300 14 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 Programming Software Have a comment about Crestron software? Direct software related suggestions and/or complaints to Crestron via email (software@crestron.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 15 The System Views lower pane displays the PRO2 system tree. This tree can be expanded to di splay and c onfigure t he communicati ons ports.
System Power Supply Crestron C2N-SPWS300 16 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 “Device Settings” Window for the C2N-SPWS300 NOTE: SIMPL Windows automatically change s NET ID v alues of a de vice added to a program if a duplicate device or a devi ce with the same default NET ID already exists in the program.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 17 Signal Types Signals interc onnect the vari ous devi ces and logic sym bols that com prise a SIMPL program. Sign als can be one of three types: digital, a nalog, or seri al.
System Power Supply Crestron C2N-SPWS300 18 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 C2N-SPWS300 Input/Output Signals The following tables list and give fun ctional descriptions for the power su pply outputs an d inputs .
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 19 Uploading and Upgrading Assuming a PC is properly connected to the entire system, Crestron prog ramming software allows the programmer to upload programs to the system after their development.
System Power Supply Crestron C2N-SPWS300 20 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 Typical Connect ion Diagram when Uplo ading a Proj ect 1. Open the Crestr on Viewpor t. Either launch the stan d-alone version of Viewpo rt, or start SIMPL Windows a nd from the menu bar, sel ect Tools | Viewport .
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 21 “Port Settings” Window NOTE: Differ ent control sy stem s may requi re different communi cation sett ings. Refer to each control system’s Operatio ns Guide for proper communication settings.
System Power Supply Crestron C2N-SPWS300 22 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 2. As shown after this step, select File Transfer | Send Program (alternatively, press Alt+P ) from the Viewport menu. File Transfer | Sen d Program Comm and 3.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 23 Firmware Upgrade A firmware upgrade file has the extension .csf. To take adva ntage of al l the C2N-SP WS30 0 features, it is im portant that the unit contains the latest firmware available.
System Power Supply Crestron C2N-SPWS300 24 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 “Open” Win dow 4. Browse t o the desire d .
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 25 Problem Solving Troubleshooting The table belo w provides c orrective acti on for possibl e trouble situations. If further assistance is required, please contact a Cres tron custom er service representative.
System Power Supply Crestron C2N-SPWS300 26 • System Power Sup ply: C2N-SPWS300 Operations Guide - DOC. 8190 Further Inquiries If, after reviewing this Operations Guid e for the C2N-SPWS300, you cannot locate specific inform ation or have questions, please take a dvantage of Crestron's awa r d winning customer service team in your ar ea.
Crestron C2N-SPWS300 System Power Supply Operations Guide – DOC. 8190 S ystem Power Supply: C2N-SPWS300 • 27 Return and Warranty Policies Merchandise Returns / Repair Service 1. No me rchandise may be ret urned for cr edit, exchan ge, or service without prior authorization from CRESTRON.
Crestron Electronics, Inc. Operations Guide – DOC. 8190 15 Volvo Drive Rockleigh, NJ 07647 06.03 Tel: 888.CRESTRON Fax: 201.767.7576 Specific ations subject to www.
An important point after buying a device Crestron C2N-SPWS300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron C2N-SPWS300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron C2N-SPWS300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron C2N-SPWS300 you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron C2N-SPWS300 will certainly help you make a decision on the purchase.
If you already are a holder of Crestron C2N-SPWS300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron C2N-SPWS300.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron C2N-SPWS300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron C2N-SPWS300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
