Instruction/ maintenance manual of the product DTX600 Cresta
Go to page of 11
DTX600 WEA THERST A TION USER MANUAL Thank you for purchasing this device, Please read the operating instructions carefully to familarize yourself with the features and modes of operation before using the instrument.
• Batter ies : 2 x AA, LR 06 1.5V Installation • Installing the Batteries • Open the main unit battery cover located at the back of the unit and insert 2XAA batteries into the battery compartment and close the battery cover . • Pull away the shower proof casing of the thermo-hrgro sensor to reveal the 2 sockets.
• First insert the batteries of main unit, then insert the batteries of the outdoor sensor in 3 minutes after the main unit is powered on, to assure of the sensor data received well. In case of the outdoor sensor data received failure, pls press ALARM key for more than 3 seconds to synchronize the RF signal.
3. Mounting the rain sensor to the second plastic bracket: there are vertical engraved lines at the bottom edge of the round cover and the sensor part, you only need adjust the two line into one posit.
Note : please don’t put in or take off the plug very of fen,or put the plug outside in the air so long time to avoid any damage of the plug , if so, there will be bad connection.
LCD overview 1. Weather Forecast 2. Living space humidity 3. Indoor humidity trend 4. Indoor low battery 5. Rainfall 6. Air Pressure 7. Wind direction 8. Date 9. Wind speed 10. Month 1 1. Day of week 12. Moon Phase 13. Dual alarm 14. Time 15. RCC symbol 16.
23. RF symbol 24. Indoor temperature alert 25. Outdoor temperature trend 26. Indoor temperature 27. Indoor temperature trend A=MODE B= + C=- D= ALARM E= ALERT F=SNOOZE/LIGHT Initial Operation • After inserting the batteries, the main unit will connect with the outdoor sensor by RF signal.
• The clock automatically changes from set-up mode to time display mode if no keys are pressed for 20 seconds. • Explanation for the time zone display: Y ou can manually adjust the clock to the ti.
• Press “ALERT” for more than 3 seconds, the upper limit of inside temperature is flashing, use “ + “ and “ - “ to set the maximum alert temperature. • Press “ALERT “ , the lower limit of inside temperature is flashing, use “ + “ and “ - “ to set the minimum alert temperature.
Illumination • Press the key “ SNOOZE/LIGHT “ to activate the display illumination for 8 seconds. Moon phase display The weather station uses saved data to show the moon phase A B C D E F G H A:.
• Press “ + “ , “ - “ for more than 3 seconds to enter or quit the Radio controlled signal reception • The clock synchronizes with the DCF radio signal automatically and daily from AM 1:00 to 3:00 to correct potential time deviations each hour .
An important point after buying a device Cresta DTX600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cresta DTX600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cresta DTX600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cresta DTX600 you will learn all the available features of the product, as well as information on its operation. The information that you get Cresta DTX600 will certainly help you make a decision on the purchase.
If you already are a holder of Cresta DTX600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cresta DTX600.
However, one of the most important roles played by the user manual is to help in solving problems with Cresta DTX600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cresta DTX600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
