Instruction/ maintenance manual of the product TX50DE Crate Amplifiers
Go to page of 12
Driver’ s Guide for the CRA TE LIMO battery power ed amplifier with the new rugged, lightweight molded polymer enclosure!.
CRA TE CONGRA TULA TIONS! Y ou are now the pr oud owner of the Crate TX50DE battery po wered ampli- fier with Digital Signal Processing. At last, y ou can take your music with you and have great tone on the r oad.
CRA TE 3 FEA TURES: • T wo separate channels • Crate’ s Digital Signal Processing (DSP) • Insert jack for connecting external effects • CD Inputs for connecting background music • F ootswi.
CRA TE 4 ABOUT THE POWER SUPPL Y : The TX50DE uses a sealed lead-acid 12-volt battery as its internal power source . Unlike ni-cad batteries, this battery has no “memory” – it can be fully recharged at any time , without damage to the battery .
CRA TE 5 ABOUT THE POWER SUPPL Y ( continued ): The TX50DE may also be po wered by using a 12-volt vehicle cigarette lighter adapter , available at most electronic supply stores. Make certain that the polarity on the adapter matches what is shown below .
CRA TE 6 THE FRONT P ANEL : 1. LOW Z: Connect a lo w impedance micro- phone here by means of a shielded signal cable terminated with an XLR type connector . 2. HIGH Z: Connect a high impedance micr o- phone here by means of a shielded signal cable terminated with a 1/4 ” connector .
CRA TE 7 14. LOW (Active only when the Channel Select switch is in the out position): Use this contr ol to adjust the low frequency level for the instru- ment channel 2. 15. MID (Active only when the Channel Select switch is in the out position): Use this contr ol to adjust the mid frequency level for the instru- ment channel 2.
CRA TE 8 YPP117 DUAL MONO 1/4" TO STEREO 1/4" ADAPTER STEREO 1/4" TO STEREO 1/4" CABLE TO INSERT JACK TO ST ANDARD INSERT JACK OF EFFECT (IF EFFECT IS NON-INVERTING) TO INVERTED IN.
CRA TE 9 SUGGESTED SET -UPS: The TX50DE can be used in a variety of differ ent ways, some of which are shown belo w and on the following page. Use these ideas to fuel y our imagination for the setup which best suits your needs. Idea 1 – Play and sing, with external effects and backup: Connect a micro- phone to the Low Z jack.
CRA TE 10 SUGGESTED SET -UPS ( continued ): Idea 3 – Sing along: Connect a low impedance micr ophone to the Low Z jack. Connect a high impedance microphone to the Instrument Input jack. Connect a tape player (for sound tr acks and back up music) to the CD Input jacks.
CRA TE 11 SYSTEM BLOCK DIAGRAM: INSTRUMENT CHANNEL MIC CHANNEL CD INPUTS LOW MID HIGH GAIN LEVEL 1 2 CHANNEL SELECT LEVEL DSP SEND TONES LOW MID HIGH TONES SHAPE DC CHARGER CHARGING CIRCUIT SMART CHARGER FUSE DC CIGARETTE LIGHTER ADAPTER HEAD PHONES SPEAKERS POWER AMP FOOTSWITCH DSP/CH.
©2001 SLM Electronics • A division of St. Louis Music 1400 F erguson Avenue • St. Louis, MO 63133 P/N 47-099-02 • 08/01 CRA TE TECHNICAL SPECIFICA TIONS OUTPUT POWER RA TING 5 0W RM S @ 10% THD , 4 ohms, 13.
An important point after buying a device Crate Amplifiers TX50DE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crate Amplifiers TX50DE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crate Amplifiers TX50DE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crate Amplifiers TX50DE you will learn all the available features of the product, as well as information on its operation. The information that you get Crate Amplifiers TX50DE will certainly help you make a decision on the purchase.
If you already are a holder of Crate Amplifiers TX50DE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crate Amplifiers TX50DE.
However, one of the most important roles played by the user manual is to help in solving problems with Crate Amplifiers TX50DE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crate Amplifiers TX50DE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
