Instruction/ maintenance manual of the product PM82S Crate Amplifiers
Go to page of 12
In order to achieve maximum performance from your new Crate Audio Mixer we recommend that you read this user ’ s guide prior to its use. Powered Mixers with Digital Signal Processing User ’ s Guid.
2 Congratulations. Y ou are now the proud owner of the compact and versatile Crate Audio PM62S/PM82S/PM82T pow- ered mixer with Digital Signal Processing. In order to obtain the best performance from your new mixer , please read this User ’ s Guide prior to its use.
Features: The Input Channels: • Peak LEDs for optimum level settings • Three bands of equalization • Monitor , ef fects, and pan controls • Output level controls • Pad switch (mono channels).
1. PEAK LED: This LED illuminates when the input signal nears clipping. During normal operation, this LED will flash on strong signal peaks. If the LED remains illuminated, depress the Pad switch (#9) and/or reduce the level of the signal connected to the input jack (#10,1 1).
12. PEAK LED: This LED illuminates when the input signal nears clipping. During normal operation, this LED will flash on strong signal peaks. If the LED remains illuminated, reduce the level of the signal connected to the input jack (#20,21). 13. HIGH: Use this control to adjust the high frequency level for the channel.
The Master Section: 22 23 32 34 42 40 41 43 44 45 46 47 35 36 37 24 30 28 38 39 29 25 31 26 27 33 6 PM62S/PM82S/PM82T Powered Mixers 22. DSP ON: This switch, when depressed, acti- vates the internal digital signal processor . 23. PROGRAM: Use this rotary switch to select the desired digital effect.
The Master Section (con ’ t): 31. LIMITER/LED METER: The mixer employs inter- nal limiter circuits to prevent overdrive distortion from being reproduced by the amplifiers. The Limiter LEDs illuminate when either of the main amplifiers’ internal limiter circuits are activated.
48. SPEAKERS - LEFT / RIGHT : Stereo Mode Only! (See #39, front panel master sec- tion.) Use these jacks to connect the mixer to your left and right main speakers. Observe the four ohm minimum load rating and the additional speaker information printed on the rear of the mixer .
The DSP Section: PROGRAM # NAME DESCRIPTION 1 VOCAL 1 slight chorus, short slapback delay , medium hall reverb 2 VOCAL 2 chorus with large hall reverb 3 VOCAL 3 doubler , short flange, large plate rev.
System Block Diagram: +48V PHANTOM POWER STEREO CHANNELS: LOW LM H MID HIGH PAN PAN LEVEL LEVEL MON MON EFFECT EFFECT RIGHT RIGHT EFFECT LEFT LEFT EFFECT MONITOR MONITOR AUX IN LEFT AUX IN RIGHT TAPE .
11 System Block Diagram (con ’ t): LIMITER/ LED DISPLAY INV BRIDGE STEREO 3 2 1 SPEAKERS BRIDGE SPEAKERS A LEFT POWER AMP RIGHT POWER AMP SPEAKERS B SPEAKERS A SPEAKERS B HEAD- PHONES HEAD- PHONE LE.
www .crateaudio.com ©2004 SLM Electronics, Inc. • A Division of St. Louis Music, Inc. 1400 Ferguson Avenue • St. Louis, MO 63133 18-681-02 • 101304 PM62S/PM82S/PM82T Powered Mixers T echnical Specifications Due to ongoing product development and improvement, the specifications contained herein are subject to change without notice.
An important point after buying a device Crate Amplifiers PM82S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crate Amplifiers PM82S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crate Amplifiers PM82S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crate Amplifiers PM82S you will learn all the available features of the product, as well as information on its operation. The information that you get Crate Amplifiers PM82S will certainly help you make a decision on the purchase.
If you already are a holder of Crate Amplifiers PM82S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crate Amplifiers PM82S.
However, one of the most important roles played by the user manual is to help in solving problems with Crate Amplifiers PM82S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crate Amplifiers PM82S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
