Instruction/ maintenance manual of the product HIGH PRESSURE WASHER 580.76225 Craftsman
Go to page of 16
SmARS Owner's Manual CRAFTSMAN ° 6.0 HORSEPOWER 2250 PSI 2.2 GPM HIGH PRESSURE WASHER Model No. 580.762250 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. PRESSURE WASHER / CUSTOMER HEUPUNE HOURS: Mon,- Fri.
SAFETY RULES .......................... 2-3 ASSEMBLY .............................. 4-5 OPERATION ............................ 6-10 MAINTENANCE ...................... .V.!1,131 _ ............. 14 SERVICE AND ADJUSTMENTS ._. ..... STORAGE .............
• Units with broken Or missing parts, or without protective housing or covers should NEVER be operated. • The muffler and air cleaner must be installed and in good condition before operating the Pressure Washer. These components act as spark arrestors if the engine backfires.
CARTON CONTENTS The following parts are shipped loose with your pressure washer: • Main Unit -- pressure washer with wheels and guide handle • Product Introduction Video • Nozzle Cleaner Kit •.
• • Place assembled spray gun on holder. Cut tie wrap from high pressure hose. Connect high pressure hose to gun with either two adjustable wrenchs or one 11/16" and one 7/8" wrench. Remove plastic cap and connect high pressure hose to pump.
KNOW YOUR HIGH PRESSURE WASHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER, Compare the illustrationswith your high pressure washer to familiarize yourself with the locations of various controls and adjustments.
HOW TO USE YOUR PRESSURE WASHER IF YOU HAVE ANY PROBLEMS operating your pres- sure washer, please call the pressure washer helpline at 1-800-222-3136. A WARNING NEVER adjust spray pattern when spraying. NEVER put hands in front of spray nozzle to adjust spray pattern.
Toapply detergent follow these steps: • Prepare the detergent solution as required by the job. • Hang the detergent solution on the "J" hook on the wire form on the guide handle.
BEFORE STARTING THE PRESSURE WASHER To operate the engine you will need to do the following: ENGINE OIL A 20 oz. bottle of SAE 30 weight oil is included in the parts carton. Fill engine crankcase with recommended oil until oil level is at FULL point on dipstick.
TO START YOUR PRESSURE WASHER You have assembled your high pressure washer and have prepared the engine for starting. You are now ready to clean your car, boat or the outside of a buildingor whatever you plan to clean: The best way to start your engine-powered pressure washer for the first time is to follow these instructions step-by-step.
CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE HOURLY OPERATING INTERVAL REGULAR SERVICE Every 25 Every 50 Every100 Before Each Hours or Hours or Hours or MAINTENANCE TASK Use Yearly Yearly Yearly SERVICE DATES PRESSURE WASHER Check/clean water inlet screen onquick-connect.
BEFORE EACH USE • Checkwater inlet screen for damage. • Check • Check o high pressure hose for leaks. detergent inlet hose and filter for damage.
CLEAN/REPLACE SPARK PLUG Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better. Replace with Champion RJ-8C or equivalent type spark plug. Set spark plug gap 0.
CARBURETOR If you think your carburetor needs adjusting, see your nearest Sears Service dealer. Engine performance may be affected above 4,000 feet in altitude.
AFTER EACH USE Water should not remain in the unit for long periods of time. Sediments of minerals can deposit on pump parts and "freeze" pump action. Follow these procedures after every Use: • Flush detergent hose by placing the injector filter into a pail of clear water while running Pressure Washer with nozzle in low pressure mode.
PROBLEM Pump has following problems: failure to produce pressure, erratic pressure, chattering, lossof pressure, low water volume. CAUSE 1. Nozzle in lowpressure mode. 2. Water inlet is blocked. 3. Inadequate water supply 4. Inlet hoseis kinked or leaking 5.
An important point after buying a device Craftsman HIGH PRESSURE WASHER 580.76225 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman HIGH PRESSURE WASHER 580.76225 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman HIGH PRESSURE WASHER 580.76225 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman HIGH PRESSURE WASHER 580.76225 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman HIGH PRESSURE WASHER 580.76225 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman HIGH PRESSURE WASHER 580.76225, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman HIGH PRESSURE WASHER 580.76225.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman HIGH PRESSURE WASHER 580.76225. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman HIGH PRESSURE WASHER 580.76225 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
