Instruction/ maintenance manual of the product FRONT TINE TILLER WITH REVERSE 917.292402 Craftsman
Go to page of 33
Owner's Manual CRRFTSM;IN" 5.5 HP 26 INCH TINEWIDTH FRONT TINE TILLER WITH REVERSE Model No. 917.292402 • Safety • Assembly • Operation • Maintenance • Espa_ol • Repair Parts CAUTION: Read and follow all Safety Rules and Instructions beforeoperating this equipment Sears, Roebuck and Co.
Warranty ................................................. 2 Safety Rules ............ .. ........... _ ................. 2 Product Specifications ........ . ................. 4 Assembly ................................................ 6 Operation ...
OPERATION • Do not put hands or feet near or under rotating parts. • Exercise extreme caution when operat- ing on or crossing gravel ddves, walks, or roads.
PRODUCT SPECIRCATIONS HORSEPOWER: 5.5 HP DISPLACEMEN'R 13 CU. IN. (221CC) GASOUNE CAPACITY: 3 Quarts Unleaded Regular OIL (API-SF/SG/SH): SAE 30 (Above 32°F) (CAPACITY: 20 oz.) SAE 5W-30 (Below 32"F) SPARK PLUG : Champion RJ19LM (GAP: .030") or J19LM Congratulations on your purchase of a Sears Tiller.
Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all pads and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tight- ness.
UNPACK CARTON _CAUTION: Be careful of exposed sta- ples when handling or dispoSing of carton- ing material. IMPORTANT When unpacking and as- sembling tiller, be careful not to stretch or kink cable(s). • Cut cable ties secudng handle column and reverse rod.
KNOW YOUR TILLER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of vad- ous controls and adjustments. Save this manual for future reference.
The operation of any tiller can result in foreign objects throwninto the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling.
BEFORE STARTING ENGINE IMPORTANT: Be very carefulnot to allow dirt to enter the engine when checking or adding oil or fuel. Use clean oil and fuel and store in approved, clean, covered con- tainers, use clean fill funnels. FILL ENGINE WITH OIL • Remove hang tag from engine_ • With engine level, remove engine oil filler plug.
Control Control Starter BREAKING IN YOUR TILLER Braak-in your belt(s), pulleys and tine con- trol before you actually begin filling. • Start engine, tip tines off ground by preying handles down and engage line control to start tine rotation. Allow tines to rotate for five minutes.
SCHEDULE FILL IN DATES __,_. _ ,_. _ ,_. _ ,._._'_'_ REGULAR SERVICE Change Engine Oil 1_1.2 Oil Pivot Points ll_ Inspect Spark/U'rester / U.mer V' Inspect _r S_ean l/ Clean or R6place Air Cleaner Cartridge I_ 2 Clean Engine Cylinder Fins Replace Spark Plug t/' 1.
Disconnect spark plug wire before per- forming any maintenance (except carbure- tor adjustment) to prevent accidental start- ing of engine. Prevent fire!! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for main- tenance.
Cylinder Fins Muffler-_ / /Blower .__--_T HOusing MUFFLER Do not operate tiller without muffler. Do not tamper with exhaust system. Damaged mufflem or spark arrestem could create a fire hazard.
NOTE: When reassembling outer tines, be sure right tine assembly (marked "R") and left tine asseml:tly (marked =L") are mounted to correctslde of tine shaft. TINE OPERATION CHECK WARNING: Disconnect spark plug wire from spark plug to prevent starting while checking tine operation.
• Wrap V-belt around reverse idler pulley and reassemble idler to idler arm. Tighten securely. Be sure belt is betw .een reverse idler pulley apd idler arm pin. ° Install belt to outside groove of transmis- sion pulley. Be sure belt is inside all belt guides and rests on outside groove of engine pulley.
Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more. ,_CAUTION: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before stodng in any enclosure.
PROBLEM Will not start Hard to start Loss of power CAUSE 1. Out of fuai. 2. Engine not =CHOKED" propedy. 3. Engine flooded. 4. Dirty air cleaner. 5. Water in fuel. 6. Clogged fuel tank, 7. Loose spark plug wire. 8. Bad spark plug or improper gap.
PROBLEM Engine overheats Excessive bounce/ difficult handling Soil balls up or clumps Engine runs but tiller won't move Engine runs but labors when tilling CAUSE 1. Low oil level/dirty oil. 2. Dirty, engine air screen. 3. Dirty engine. 4. Partially plugged muffler.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 HANDLE ASSEMBLY 1 13 2 1 11 3 4 12 19 16 25 / / I I • t 17 18 5 6 /--8 KEY PART KEY PART NO. NO. DESCRIPTION NO.
REPAIR PARTS TILLER - - MODEL NUMr-,,-n u, i .,_u2402 BELT GUARD AND PULLEY ASSEMBLY 29 8 2e 10 11 12 14 lS 26 KEY PART NO. NO. 1 166013 2 9484R 3 86777 4 74610812 5 STD541037 6 STD551037 7 2009J 8 127180X 9 74760628 10 156705)(558 11 STD551025 12 104213X 13 721404O6 14 133035 15 2614J 16 120(X_28 24 23 32 18 21 KEY PART DESCRIPTION NO.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 WHEEL AND DEPTH STAKE ASSEMBLY 7 17 1920 19 1 / _ 16 17 KEY PART NO. NO. 1 9194R 2 74760520 3 STD523107 4 STD541031 5 STD551131 6 $TD541437 7 4921H 8 1952J 9 122233X 10 326J 11 74780628 13 1951J KEY PART DESCRIPTION NO.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 TINE ASSEMBLY / 6 2 3 2 i 5 6 KEY PART NO. NO. 1 156934 2 163552 3 156932 DESCRIPTION "Rne, Outer, R.H. Clip, Hairpin "line,Inner, R.H. KEY PART NO. NO. 4 156931 5 156933 6 4929H DESCRIPTION "nne.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 TRANSMISSION 6 11 14 15 12 KEY PART NO. NO. 1 74760524 2 STD523732 3 STD551037 5 STD541437 6 9057R558 7 1949J 8 1948J 9 STD551131 10 STD541031 11 74760544 12 151222 13 STD551050 DESCRIPTION Bolt,Hex 5/16-18 x 1-1/2 Gr.
• REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 'DECALS 5 6 KEY PART NO, NO. DESCRIPTION 1 163O45 2 166130 3 166131 4 137653 5 120431X 6 147592 8 120075X 9 162215 -- 166006 Decal, Logo Decal,.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 BRIGGS & STRATTON ENGINE - MODEL NUMBER 134202, TYPE NO.1118-E1 13 383 10 26 614 45 219 220 _1036 LABEL KIT EMISSION "k REQUIRESSPECLM.
REPAIR PARTS TILLER -- MODEL NUMBER 917.292402 BRIGGS & STRA'I-T'ON ENGINE - MODEL NUMBER 134202, TYPE NO.1118-E1 ltl0 111 I 127A 127 187 1")4 _ 3" 45.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 BRIGGS & STRATTON ENGINE - MODEL NUMBER 134202, TYPE NO.1118-1=1 _ __ IIrREOUIRESSPECIALTOOLS _",,_,_ _ TO INSTALLSEE REPAIR 24_ _ _ _ ,NSTRU.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292402 BRIGGS & STRATTON ENGINE - MODEL NUMBER 134202, TYPE NO.1118-E1 KEY PART KEY PART NO. NO. DESCRIPTION NO, NO.
REPAIR PARTS TILLER - - MODEL NUMBER 917.2§2402 BRIGGS'& STRA'rroN ENGINE - MODEL NUMBER 134202, TYPE NO.1118_-E1 KEY PART KEY PART NO. NO.
49.
50.
51.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) Para ordenar piezas con entrega a domicilio - 1-800-659-708.
An important point after buying a device Craftsman FRONT TINE TILLER WITH REVERSE 917.292402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman FRONT TINE TILLER WITH REVERSE 917.292402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman FRONT TINE TILLER WITH REVERSE 917.292402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman FRONT TINE TILLER WITH REVERSE 917.292402 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman FRONT TINE TILLER WITH REVERSE 917.292402 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman FRONT TINE TILLER WITH REVERSE 917.292402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman FRONT TINE TILLER WITH REVERSE 917.292402.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman FRONT TINE TILLER WITH REVERSE 917.292402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman FRONT TINE TILLER WITH REVERSE 917.292402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
