Instruction/ maintenance manual of the product 973.2748.70 Craftsman
Go to page of 16
Owner's Manual Variable Speed / Reversible 318 in. PROFESSIONAL CORDLESS DRILL-DRIVER Model No. 973.2748.70 _1_ CAUTION: Read and follow all Safety Rules and Operating Instructions betor_ f_st _se _I this product.
• Warranty ....... _ ................................................................................................................................................. 2 • Introduction and Product Specifications ....................................
The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
RULES FOR SAFB_OPERATION (Continued) i m n M NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning.
RULES FOR SAFE OPERATI_ (Continued) An extension cord should not be used unless • absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: • a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger.
The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power Screwdriver/Nutddver Set and Case • 17-Pc. Power Screwdfiver/Nutdriver Set and Case • High Speed Bits (For Wood or Metal).
_1= WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. _k WARNING: Do not allow familiarity with your ddll-ddver to make you careless.
SWITCH See Figure 2. To tum your drill ON, depress the switch tdgger. To tum it OFF, release the switch tdgger. CENTERPosmoN TO INSTALL BATTERY PACK • Lock switch trigger on your drill by placing the direction of rotation selector in center position.
REVERSIBLE See Figure 4. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the ddll held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling.
INSTALLING BITS See Figure 7. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 2. • Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use.
BIT STORAGE See Figure 10. When not in use, bits provided with your ddll can be placed in the storage area located on the top of your drill as shown in figure 10. SCREWDRIVER BITS DRILLING See Figure 12. BIT STORAGE AREA Fig. 10 ,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools.
CHUCK REMOVAL See Figures 13, 14, and 15. The chuck must be removed in order to use some accessories. To remove: • Lock the switch tdgger by placing the direction of rotation selector in center position. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely.
,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic pads. Most plastics ere susceptible to damage from various types of commemial solvents and may be damaged by their use.
To preserve natural resources, please recycle or dispose of expired battery pack properly. This product contains nickel-cadmium battery. Must be disposed of properly. Local, state, or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash.
CRAFTSMAN PROFESSIONAL 3/8 inch CORDLESS DRILL-DRIVER MODEL NO. 973.274870 I Them_de_numberwi__bef_und_naplateattachedt_them_t_rh__sing_A_waysmenti_nthem_de_ I number in all correspondence regarding your 3/8 In, CORDLESS DRILL-DRIVER or when ordering repair parts.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) . For repair service Call 24 hours a day, 7 days a week 1.800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area _ Call 24 hours a day, 7 daysa week 1-800-488-1222 ,.
An important point after buying a device Craftsman 973.2748.70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 973.2748.70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 973.2748.70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 973.2748.70 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 973.2748.70 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 973.2748.70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 973.2748.70.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 973.2748.70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 973.2748.70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
