Instruction/ maintenance manual of the product 944.511591 Craftsman
Go to page of 11
Instruction Manual I CRAFTSMAN°I BRUSHCU'I-FER A'I-FACHMENT Model No. O944.511591 NOT DESIGNED FOR USE WITH ELECTRIC POWERHEADS • Safety • Assembly • Operation • Maintenance • Parts List _ ANGER: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Warranty Statement 2 Maintenance 10 Identification of Symbols 2 Service & Adjustments 10 Safety Rules 2 Storage 11 Assembly 5 Parts List Center Section Operation 7 Parts and Ordering Back Cover LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN ® BRUSHCUTTER ATTACHMENT For two (2) years from the date of purchase, Sears Canada, Inc.
DANGER: Blade can thrust vio- lently away from material itdoes not cut. Blade thrust can cause amputa- tion of arms or legs. Keep people and animals 50 feet (15 meters) away. _ WARNING: Blade can throw ob- jects violently. You can be blinded or injured.
ken, or damaged in any other way before using the unit. • Maintain the unit according torecom- mended procedures. Keep the blade sharp. Never use flailing devices, wire, rope, string, etc. • Use only specified blade; make sure itis properly installed and securely fastened.
CARTON CONTENTS Check carton contents against the fol- lowing list. Model 0944.511591 • Brushcutter attachment • Handlebar • Handlebar mounting bracket for 1" (2.
2. Position one of the bracket covers under the upper shaft and align the mounting bracket and the bracket cover screw holes. Insert two screws into the screw holes. 3. Secure the mounting bracket by tightening the screws with the hex wrench. 4. Locate the decal on the handlebar.
HARNESS ADJUSTMENT FOR BALANCE 6 inches below 4 - 12 waist inches above ground 30i KNOW YOUR BRUSHCUTTER ATTACHMENT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiar- ize yourself with the location of various controls and adjustments.
Coupler Lower Attachment Upper Shaft LOOSEN TIGHTEN Knob 2= Press and hold the locking/release button. Locking/Release Button Lower Attachment 3= While securely holding the upper shaft, pull the attachment straight out of the coupler. INSTALLING ATTACHMENT 1= Remove the shaft cap from the at- tachment (if present) and discard.
• WHEN BLADE THRUST OCCURS - Blade Thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it is difficult to see the material being cut. By using the unit properly, the occurrence of blade thrust will be reduced and the opera- tor will be less likely to lose control.
MAINTENANCE SCHEDULE _l WARNING: Always stop unit and disconnect spark plug wire before performing maintenance. CARE AND MAINTENANCE TASK Check for loose fasteners and parts Check for damaged or worn .
4, 5. Shield Remove both washers and the blade from the blade shaft. Leave the dust cup on the gearbox. Install new blade and retaining washer onto the threaded shaft ex- tending from the gearbox (blade must be between the dust cup and the retaining washer).
An important point after buying a device Craftsman 944.511591 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 944.511591 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 944.511591 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 944.511591 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 944.511591 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 944.511591, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 944.511591.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 944.511591. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 944.511591 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
