Instruction/ maintenance manual of the product 917.773423 Craftsman
Go to page of 25
Owner's Manual 5.5 HORSEPOWER 22 INCH CUT WHEELED WEEDTRIMMER Model No. 917.773423 • Safety • Assembly • Operation • Maintenance • Espa_ol • Repair Parts _CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment.
Warranty ................................................. 2 Safety Rules ........................................ 2-4 Assembly ................................................ 5 Operation ............................................. 6-8 Maintenance Schedule .
The operation ofany trimmer can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tdmmer or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
II. SLOPE OPERATION Slopes are a major factor related to slip and fall accidents which can result in severe injury, All slopes require extra caution. If you feel uneasy on a slope, do not tdm it. DO: • Tdm across the face of slopes: never up and down.
Read Ihase les_a_-tJons and _ manual in its entirety before you attempt to assernble or operateyour new lrimmer. IMPORTANT: This trimmeris shipped WITHOUT OIL OR GASOLINE inthe engine. your new ldmmerhas been assombled at tha facto_ withthe exception of thase parts left unassembled for shipping purposes.
KNOW YOUR TRIMMER READTHIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATINGYOUR TRIMMER, Compare the ilusb'ations withyour fdmmer to familiarize yourself withthe location of Verious controls and a_ustments.
The operation ofany tdmmer can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your trimmer or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
3. You receive a 20oz. container ofoil with the unit. Slowly pour 3/4 (15 oz,) ofthe oil from the container down the oil fill spout into the engine. 4. Wait one minute to allow oil to settle. Insert and tighten dipstick, then remove it to check oil level.
aESOP,, SEnV,CE ;.' 'ISERVIOE DATES IT Check for Loo_e Fasteners _ (I/ = R i Clean Tdmmer I¢ # lb # I M clean Under Engine Cover I_z Ik / E_ Check drive belt/pulleys R Check/Replace Tdmmer Lines I1_:_ Check Engine Oil Level I_ Change Engine Oil _1_/t ,2 Clean Air Filter I_ 2 | Inspect Muffler V S N! cl.
TRIMMER Always observe safety ruleswhen perform- ing any maintenano_. TIRES • Keep tires flee of gasolne, oil, or insect cunlml chemicals which can harm rubber. • Avoidstumps, stcues, dcep ruts, sharp objects and o_er hazards that may cause tire damege.
TO CHANGE ENGINE OIL NOTE: Before tipping trimmer todrain oil, drain fuel tank by running engine until fuel tank is empty. 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Remove engine oil cap; lay aside on a clean surface.
CLEAN UNDER ENGINE COVER Clean under engine cover before each use, or more frequently in heavy cutting or dirty conditions. Engine cover screen and engine air intake screen must be kept free of dirt and chaff to prevent engine damage from overheating.
CAUTION: Before performing any service and adjustments: 1. Stop engine. 2. Make sure the rotating lines and all moving parts have completely stopped. 3.
8. Remove belt from trimmer head pulley. 9. Note the position of the control cable and idler retum spdng, then remove idler assembly from chassis and remove belt and idler from trimmer. 10. Remove belt from idler assembly by removing bottom belt keeper and idler pulleys.
Immediately prepare year bimmer for storage at the end of the seaean er if the unit wtll not be used for 30 days or more. TRIMMER When 5_mmer is to be stored for a period of time, dean it thoroughly, remove all dirt, grease, leaves, etc. Store in a dean, dry area.
TROUBLESHOOTING PROBLEM CAUSE Doesnotstart 1, Dirtyairfilter. Loss of power Excessive Vibration Starter rope hare topull Loss of head drive Hard to push Poor trimming j performance Trimmer head does not retain line 2. Out of fuel. 3. Stale fuel. 4. Water in fuel.
CRAFTSMAN WEED TRIMMER-- MODEL NUMBER 917.773423 18 1 11 26 27 14 27 25 34.
CRAFTSMAN WEED TRIMMER- - MODEL NUMBER 917.773423 KEY PART NO. NO. DESCRIP11ON 1 2 3 4 5 6 7 8 9 f(} 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 34 35 - - - Engine, Craft=man, Modol Number 143.
CRAFTSMAN WEED TRIMMER-- MODEL NUMBER917.773423 20 44 47 21 14 43 4 17 23 24 13 r 27 32 0_31 5O 36.
CRAFTSMAN WEED TRIMMER-- MODEL NUMBER 917.773423 KEY PART NO. NO. DESCRIP'nON 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2O 21 22 23 24 25 26 27 28 29 3O 31 32 33 34 36 37 38 39 4O 41 43 44 45 46 47 48 49 50 61 52 174031X558 Chassis Assernbly 169802 Line, Trimmer.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.015502 40O 135 130 416 185 120 119 125 46 309A 311A , 38.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.015502 KEY PART NO. 140. DESCRIPI_N 1 37266 2 26727 6 33734 7 36557 12 36775 12A 36558 12B 36694 14 25277 15 30589 16 34839A 17 31335 18 651018 19 37329 _0 32.
CRAFTSMAN 4-CYCLE ENGINE MODELNUMBER143,015502 PART NO, NO. -- 640262 1 631615 2 631767 4 631184 5 631183 6 640070 7 656506 16 631807 17 651025 18 630766 20 640018 20A 640200 25 631867 27 631024 28 63.
CRAFTSMAN 4-CYCLE ENGINE MODELNUMBER143.015502 I 12 / 13 KEY PART NO, NO, DESCRIPllON ---- 590763 Rewind Starter 1 590599A Spdng Pin (Incl. 4) 2 590600 Washer 3 590696 Retainer 4 590601 Washer 5 590697 Brake Spring 6 590698 Starter Dog 7 590699 Dog Spring 8 590700 Pulley & Rewind Spring Ass'y.
For repair of major brand appliances in your own home... no matter who made it, no matter whosold 1-8OO-4-MY-HOME e A_n_ day or r_t (1_) (u.s._ and _) For repair of carry-in products like vacuums, lawn equipment, and electronics, caU forthe nearest Sears Parts and Repair Center.
An important point after buying a device Craftsman 917.773423 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 917.773423 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 917.773423 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 917.773423 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 917.773423 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 917.773423, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 917.773423.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 917.773423. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 917.773423 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
