Instruction/ maintenance manual of the product 79938 Craftsman
Go to page of 10
Operator's Manual I CRAFTSMAN ° 12 AMP Motor 195 MPH/405 CFM ELECTRIC BLOWER/VACUUM Model No. 358.799380 @ FOR HOUSEHOLD USE _ ARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. For answers to your questions about this product, call 7am-7pm, Mon.
Warranty Statement 2 Storage 10 Safety Rules 2 Troubleshooting Chart 10 Assembly 5 Parts Available 10 Operation 8 Maintenance 9 Spanish 11 Service & Adjustments 10 Parts Ordering Back Cover FULL O.
• TO REDUCE THE RISK OF ELEC- TRICAL SHOCK--Do not use in damp or wet locations or around swim- ming pools, hot tubs, etc. Do not ex- pose to snow, rein, or water.
insulation construction to become inef- fective and result in sedous injury, UNIT/MAINTENANCE SAFETY • Turn off all controls and allow the mo- tor to stop before disconnecting the unit from the power source. • Disconnect the unit from the power source when not in use.
twigs, and bits ol paper. Do not vacu- um stones, gravel, metal, broken glass, etc., to avoid severe damage to the impeller. To avoid the possibility of electrical shock, do not attempt to vac- uum water or other liquids. • Never run the unit without the proper equipment attached.
ASSEMBLY INSTRUCTIONS FOR USING YOUR UNIT AS A VACUUM NOTE: Assembly instructions for using your unit as a blower is explained in the previous section.
ADJUSTING THE SHOULDER STRAP ON THE COLLECTION BAG • Carefully loop the shoulder strap through the buckle as shown in the illustration below. • Position the unit on your right.
KNOW YOUR ELECTRIC BLOWER READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT,Compare the illustrations to your unit to familiarize yourself with the location of the various c.
USING YOUR UNIT AS A VACUUM Use your unit as a vacuum to pick up dry material such as leaves, grass, small twigs, and bits of paper. • For best results during vacuum use, operate your unit at high speed. • Move slowly back and forth over the material as you vacuum, Avoid forc- ing the unit into a pile of debris as this can clog the unit.
HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE NOTE: If the unit becomes clogged, or an object is drawn into the air intake, stop the unit and disconnect the exten- sion cord. Wait until the impeller has completely stopped turning, then re- move the vacuum tubes.
An important point after buying a device Craftsman 79938 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 79938 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 79938 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 79938 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 79938 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 79938, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 79938.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 79938. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 79938 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
