Instruction/ maintenance manual of the product 50284 Craftsman
Go to page of 9
Operators Manual • Safety • Assembly • Operation • Maintenance • Parts HYDRAULIC BOTTLE JACK Model 9 50284 - 12 T on Capacity Model 9 50285 - 20 T on Capacity Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman website: www .
T ABLE OF CONTENTS Wa rranty .....P. 2 Save these instructions .....P. 2 Safety instructions .....P. 3 Assembly .....P. 4 Operation .....P. 4 , P. 5 & P. 6 Maintenance .....P. 6 & P. 7 Storage .....P. 7 Tr oubleshooting .....P. 8 Parts .....P.
SAFETY INSTRUCTIONS To avoid crushing and related injuries: • Never work on, under, or around a load supported only by a hydraulic jack. • Read , understand and follow all printed materials provided with and on this jack. • Immediately support the lifted load with appropriately rated jack stands.
ASSEMBLY CARTON CONTENTS Inside the box, you will find (see Fig. 1): 1. A jack 2. A rubber handle holder 3. A 2-piece handle OPERA TION HOW TO ASSEMBLE YOUR JACK (refer to Figs. 1, 2) •I nstall the rubber handle holder onto the top nut and slide downward until it rests upon the reservoir of the jack.
5 KNOW YOUR JACK (refer to Fig. 3, page 4) • Compare these illustrations with your jack BEFORE operation and/or oil level maintenance to become familiar with the location of various jack components. BEFORE USE Occasionally during shipment and/or handling, air gets trapped in the hydraulic system, which interferes with jack performance.
6 OPERA TION LOWERING THE JACK T o avoid crushing injuries and property damage: Keep hands and feet clear of work area when lowering load. 1. Raise load high enough to clear the jack stands, then carefully remove jack stands (always use in pairs). 2. Slowly turn the handle counterclockwise, but no more than 1/2 full turn.
STORAGE HOW TO STORE YOUR JACK This jack is designed for compact and convenient storage (see Fig. 5). • Insert the rubber handle holder onto the top nut. • Depress the spring lock to separate the handle pieces, and insert them into the handle holder.
TROUBLESHOOTING P ARTS M ODEL NUMBER: The Model Number and Serial Number are found on the jack label and handle socket. Always mention the Model Number and Serial Number when requesting service or repair parts for your jack.
Get it fixed, at your home or ours! © Sears Brands, LLC ® Registered T rademark / TM T rademark / SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servi.
An important point after buying a device Craftsman 50284 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 50284 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 50284 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 50284 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 50284 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 50284, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 50284.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 50284. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 50284 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
