Instruction/ maintenance manual of the product 358.798370 Craftsman
Go to page of 10
Operator's Manual CRAFTSMAN + 12 AMP Motor 200 MPH/410 CFM ELECTRIC BLOWERNACUUM Model No. 358.798370 ® FOR HOUSEHOLD USE 4_ WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. J_l For answers to your questions about this product, call 7am-Tpm, Mon.
Warranty Statement 2 Storage 10 Safety Rules 2 Troubleshooting Chart 10 Assembly 5 Parts Available 10 Operation 8 Maintenance 9 Spanish 11 Service &Adjustments 10 Parts Ordering Back Cover FULL TW.
• TO REDUCE THE RISK OF ELEC- TRICAL SHOCK--Do not use in damp or wet locations or around swim- ming pools, hot tubs, etc. Do not ex- pose to snow, rain, or water.
UNIT/MAINTENANCE SAFETY • Turn off all controls and allow the mo- tor to stop before disconnecting the unit from the power source. • Disconnect the unit from the power source when not in use. Do not leave the unit when it is plugged into outlet. • Do not set the unit on any surface ex- cept a clean, hard areawhile the unit is running.
twigs, and bits ofpaper. Do not vacu- um stones, gravel, metal, broken glass, etc., toavoid severe damage to the impeller. To avoid the possibility of electrical shock, donot attempt to vac- uum water or other liquids. • Never run the unit without the proper equipment attached.
ASSEMBLY INSTRUCTIONS FOR USING YOUR UNIT AS A VACUUM NOTE: Assembly instructions for using your unit as a blower is explained in the previous section. WARNING: Stop the unit and discon- nect from the power source before opening the inlet cover or attempting to insert or remove the inlet restrictor or vacuum tubes.
ADJUSTING THE SHOULDER STRAP ON THE COLLECTION BAG • Carefully loop the shoulder strap through the buckle as shown in the illustration below. Last In First In • Position the unit on your right-hand side, blower outlet and bag pointing toward the rear.
KNOW YOUR ELECTRIC BLOWER READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
USING YOUR UNIT AS A VACUUM Use your unit as a vacuum to pick up dry material such as leaves, grass, small twigs, and bits ofpaper. • For best results during vacuum use, operate your unit athigh speed. • Move slowly back and forth over the material as you vacuum.
HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE NOTE; If the unit becomes clogged, or an object is drawn into the air intake, stop the unit and disconnect the exten- sion cord. Wait until the impeller has completely stopped turning, then re- move the vacuum tubes.
An important point after buying a device Craftsman 358.798370 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 358.798370 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 358.798370 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 358.798370 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 358.798370 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 358.798370, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 358.798370.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 358.798370. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 358.798370 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
