Instruction/ maintenance manual of the product 358.798340 Craftsman
Go to page of 16
IMPORTANT MANUAL Do Not Throw Away SE_/ RS Operator's Manual Model No. 358.798340 WARNING READ THE OPERATOR'S MANUAL AND FOLLOWALL WARNINGS AND SAFETY INSTRUCTIONS.
I lilt i iii i i i ii i i i i IMPORTANT WARNINGS & SAFETY INSTRUCTIONS i i iii ii ibm iii i iii WARNING _The warnings and safety instructions in this manual must be followed to reduce the risk of electric fire, shock, or injury, and to provide reasonable safety and efficiency in using this unit.
i i ! i i,ir ,A IMPORTANT WARNINGS & SAFETY INSTRUCTIONS UNIf SAFETY o inspect the entire unit before each use for worn, loose, missing, or damaged parts. Do not use until the unit is in proper working order. • Have all internal service performed by qualified ser- vice repair personnel to avoid creating a hazard or voiding your warranty.
CONGRATULATIONS on your purchase of a Sears Craftsman Electric Blower/vac. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problems you cannot easily remedy, please contact your nearest Sears Service Center/Department.
III III I • I IIIII I I II III I IIIII III I IIIIIHIN II TABLE OF CONTENTS IHI I IIIIIlll I I I"11 I'111 III! I LJ IIII I I IIII II IIII II Safety Instructions ............................. 2 Product Specifications ........................
ii i iin nl iiiiiiiiiiiiinnmmllln HARDWARE CONTENTS PARTS PACKED SEPARATELY IN CARTON NOT SHOWN ACTUAL SIZE Operator's Manual Blower Tube Upper Vacuum Tube Concentrator Nozzle Lower Vacuum Tube C.
===H H= , =11 H= ASSEMBLY HoW TO AssEMBLE YOuR UNIT AS A ..... VACUUM (Fig. 4 ) VACUUM Figure 4 If your unit is configured in the blower mode, stop the unit, and remove the blower tubes and nozzle.
H,n = n,,,,, ====r= =n = =,,=, ATTAC'HING COLLECTION BAG (Fig. 9 ) • Slide the opening of the collection bag over the blower outlet. Pull the strap with Velcro tightly th rough the buckle and secure the Velcro tabs. NOTE: Make sure the strap with Velcro is located on the housin,q as shown.
=n = = = ASSEMBLY i i i CHECK LIST = Check all fasteners. Make sure they are tight and there are no loose parts. • Make sure the blower tube is firmly seated in the blower outlet• • If you are using the unit as a blower, make sure the inlet cover is latched_ = In blower mode.
KNOW YOUR ELECTRIC BLOWER READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR ELECTRIC BLOWER. Compare the ilfustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
_l, ................. = ='=!=r =1= H - SAFETY ,,,, =,H 0 OPERATION = = ,, =, OPERATOR SAFETY (Fig. 14 ) WARNING DO NOT ASSEMBLE OR DISASSEMBLETHE VACUUM TUBES WHILE THE UNIT IS RUNNING. INSERTING OR REMOVING THE VACUUM TUBES WHILE THE UNIT IS RUNNING CAN RESULT IN SERIOUS INJURY.
STOPPING YOUR UNIT • Slide the switch to the OFF position. STARTING YOUR UNIT • Slide the switch to the LOW or HIGH position. OPERATING YOUR UNIT & WARNING DO NOT USE THE UNIT WITHOUT THE BLOWER TUBES PROPERLY AT- TACHED TO AVOID FLYING DEBRIS AND/OR IMPELLER CONTACT WHICH CAN CAUSE SERIOUS INJURY.
CUSTOMER RESPONSIBILITIES = = H= MAINTENANCE SCHEDULE Fill in dates as you complete regular service. Check for damaged or worn parts. C_ean unit and labels.
i mill I I I I I i1,11|,1, i i SERVICE AND ADJUSTMENTS ii ii iiiiiiiii1|111 i iii ii iiiiiiiiiiiii ii HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE (Fig. 17 ) If an object is drawn into the unit through the air intake, do the following: • Push the switch to the OFF position and disconnect cord from the power source, • Remove the vacuum tubes.
NOTES.
Operator's Manual Model No. 358.798340 IF YOU NEED REPAIR SERVICE OR PARTS: REPAIR SERVICE 1-800-4-REPAIR (1-800-473-7247) ORDERING PARTS 1-800-WON-PART (1-800-366-7278) ASSISTANCE 1-800-235-5878 J HOURS (CST) Mon° - Sat. 7 a,m. - 7 p,m. Sun. 10 a.
An important point after buying a device Craftsman 358.798340 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 358.798340 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 358.798340 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 358.798340 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 358.798340 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 358.798340, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 358.798340.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 358.798340. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 358.798340 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
