Instruction/ maintenance manual of the product 358.794941 Craftsman
Go to page of 13
Instruction Manual I CRAFTSMAN°I 25cc/1.5 cu.in. 2-Cycle 200 MPH/400 CFM GASOLINE POWERED BLOWER/VAC Model No. 358.794941 • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Warranty Statement 2 Troubleshooting Table 11 Safety Rules 2 Emissions Statement 12 Assembly 4 Parts List 14 Operation 6 Spanish 17 Maintenance 9 Parts and Ordering Back Storage 11 FULL TWO YEAR WARRA.
• Do not operate unit when you are tired, ill, upset, or if you are under the influence of alcohol, drugs, or medi- cation. • Keep children, bystanders, and ani- mals away from work area a mini- mum of 30 feet (10 meters) when starting or operating unit.
• Empty fuel tank before storing the unit. Use up fuel left in carburetor by starting engine and letting it run until it stops. • Do not use any accessory or attach- ment other than those recommended by manufacturer for use with your unit.
2. Secure the tube by turning the knob clockwise. 3. To remove the tube, turn the knob counterclockwise to loosen the tube; remove the tube. VACUUM ASSEMBLY VACUUM BAG ASSEMBLY 1. Open tile zipper on the vacuum bag and insert the elbow tube. 2. Push the small end of the elbow tube through the small opening in the bag.
3. Remove the vacuum bag. 4= Close the vacuum inlet cover and make sure it is latched closed. 5= Reinstallthe blowertube (see BLOWER TUBE ASSEMBLY). SHOULDER STRAP ADJUSTMENT (for vacuum use only) 1. Hold the unit as shown with the muffler side facing away from your body and clothes.
CHOKE LEVER The CHOKE helps to supply fuel to the engine to aid in cold starting. Activate the choke by moving the choke lever to the FULL CHOKE position. After engine OPERATING TIPS • While vacuuming or blowing debris, hold the unit with the muffler side fac- ing away from your body and clothes (see OPERATING POSITION below).
To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.
1. Move the throttle lever to the position. 2. Pull the starter handle sharply until the engine starts, but no more than 5 pulis. NOTE" If the engine has not started, pull starter handle sharply for 5 more pulls. If engine still does not run, it is probably flooded.
CLEAN AIR FILTER _" / Air Filter _ Air Filter Cover Screws A dirty air filter decreases engine per- formance and increases fuel consump- tion and harmful emissions.
A dBi WARNING: Perform the following steps after each use: • Allow engine to cool, and secure the unit before storing or transporting. • Store unit and fuel in a well venti- lated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.
TROUBLESHOOTING TABLE (continued) TROUBLE Engh_e will not accelerate, lacks power, or dies under a load. Engine smokes excessively. Engine runs hot. CAUSE 1. Air filter dirty. 2. Fuel not reaching carburetor. 3. Spark plug fouted. 4. Carburetor requires 4.
off-road engine is purchased. LENGTH OF COVERAGE: This warranty shall be for a period of two years from the initial date of purchase. WHAT IS COV- ERED: REPAIR OR REPLACEMENT OF PARTS. Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Sears Service Center.
An important point after buying a device Craftsman 358.794941 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 358.794941 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 358.794941 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 358.794941 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 358.794941 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 358.794941, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 358.794941.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 358.794941. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 358.794941 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center