Instruction/ maintenance manual of the product 358.79101 Craftsman
Go to page of 29
Instruction Manual 25cc/1.5 cu.in. 2-Cycle 17 Inch Cutting Path / 0.080 In. Line GASOLINE WEEDWAOKER ® Model No. 358.791010 • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol For Occasional Use Only WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Warranty Statement 2 Storage 11 Safety Rules 2 Troubleshooting Chart 12 Assembly 4 Emissions Statement 13 Operation 5 Parts List 15 Maintenance 9 Spanish 17 Service & Adjustments 10 Parts and Ordering Back FULL ONE YEAR WARRANTY ON CRAFTSMAN ® GAS POWERED WEEDWACKER ® LINE TRIMMER.
If situations occur which are not cov- ered in this manual, use care and good judgment. If you need assis- tance, contact your Sears Service Center or call 1-800-235-5878. OPERATOR SAFETY • Dress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance, on your unit (safety glasses are avail- able).
flames from water heaters, electric motors or switches, furnaces, etc. • Store unit so line limiter blade cannot accidentally cause injury. The unit can be hung by the tube.
KNOW YOUR TRIMMER READ THiS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
IMPORTANT Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel sys- tem of an engine while in storage.
OPERATING INSTRUCTIONS It is recommended that the engine not be operated longer than 1 min- ute at full throttle. OPERATING POSITION ALWAYS WEAR: _ _r- Eye protection Hearing _{L_ protection _.
• The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. To help avoid damage especially to delicate vegetation or trees with tender bark, shorten line to 4-5 inches (10-13 cm) and use atless than full throttle.
MAINTENANCE SCHEDULE _, WARNING: Disconnect the spark plug except for carburetor adjustments. CARE & MAINTENANCE TASK Check for loose fasteners and parts Check for damaged or worn parts Inspect an.
REPLACE SPARK PLUG Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable. 1. Twist, then pull off spark plug boot. 2. Remove spark plug from cylinder and discard.
Idle Speed Adjustment Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow). • Turn idle speed screw clockwise to increase engine speed if engine stalls or dies. • Turn idle speed screw counterclock- wise to decrease engine speed.
TROUBLESHOOTING TABLE _, WARNING: Always stop unit and disconnect spark plug before perform- ing all of the recommended remedies below except remedies that require TROUBLE Engine will not start. Engine will not idle properly. operation of the unit. CAUSE 1.
YOUR WARRANTY RIGHTS AND OB- LIGATIONS: The U.S. Environmental Protection Agency/California Air Re- sources Board and Sears, Roebuck and Co., U.S.A., are pleased to explain the emissions control system warranty on your year 2005 and later small off- road engine.
WHERE TO GET WARRANTY SER- VICE: Warranty services or repairs shall be provided at all Sears Service Cen- ters. Call 1-800-469-4663. MAINTE- NANCE, REPLACEMENT AND RE- PAIR OF EMISSION RELATED PARTS: .
Declaraci6n de Garantia 17 Almacenaje 28 Reglas de Seguridad 17 Tabla Diagn6stica 29 Montaje 20 Declaraci6n de Emision 30 Uso 21 Mantenimiento 25 Lista de Piezas 15 Servicio y Ajustes 26 Repuesto y En.
_ADVERTENClA: La lineadecorte arroja objetos violentamente. Ustes, al igual que otras personas, puede quedar ciego o herido. Use anteojos de seguri- dad y protecci6n en las piemas.
• AI6jese a por Io menos 3 metros (10 pies) del lugar de abastecimiento antes de poner en marcha el motor. • Pare el motor y permita que se enfrie el aparato antes de retirar la tapa del tanque. • AImac6ne siempre combustible en un recipiente aprobado para los liquidos inflamables.
CONTENICO DE LA CAJA Use la siguiente lista para verificar que todas la piezas hayan side incluidas: Modelo 358.791010 • Cortadora • Protector • Recipiente de Aceite Examine las piezas para verificar que no haya daSos. No use piezas daSa- das. AVlSO: Si necesita ayuda, si faltan piezas o si hay piezas daSadas, Ilame al n_mero 1-800-235-5878.
CONOZCA SU APARATO LEA ESTE MANUAL DE INSTRUCCIONES Y LAS REGLAS DE SEGURIDAD ANTES DE PONER EL APARATO EN MARCHA. Compare las ilustraciones con su aparato para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para uso futuro.
gasolina, agite al recipiente brevemente para asegurar que el combustible este completamente mezclado. Siempre lea y siga las instrucciones de seguridad que tienen que ver con el combustible antes de abastecer el aparato.
sostenga el gatillo acelerador. Tirando de la cuerda repetidas veces mientras que presiona el gatillo acelerador hasta el motor arranque y se ponga en mar- cha. Esto podr& requerir que se tire de la cuerda del mango repetidas veces dependiendo que tan ahogado se en- cuentre el motor.
o la linea los puede arrojar violenta- mente al aire, causando serio peligro. • La punta de la linea es la que corta. Se conseguir& mejor rendimiento y el minimo desgaste si no se mete la linea dentro del material que se est& cortando. La ilustraci6n a continua- ci6n muestra la forma correcta e in- correcta de cortar.
CRONOGRAMA DE MANTENIMIENTO ADVERTENCIA: Desconecte la bujia antes de hacer cualquier manten- imiento, con la excepci6n de los ajustes al carburador. TAREA DE CUIDADO Y MANTENIMIENTO Verificar que no .
Amedida que se use el aparato, el si- lenciador y la rejilla antichispas se van carbonizando. Para el uso normal del duet_o de la casa, sin embargo, el silenciador yla rejilla antichispa no requerir&n ningQn servicio.
AJUSTE AL CARBURADOR ,i_ADVERTENCIA: Mantenga a otras personas alejadas de la zona en donde se encuentre haciendo ajustes de marcha lenta. El cabezal de corte se mantendr_t girando durante este procedimiento. Use su equipo protec- tor y observe todas las precauciones de seguridad.
_IADVERTENClA: Realice los siguientes pasos despu6s de cada USO: • Permita que el motor se enfrie y fije bien el aparato antes de guardarlo o transportarlo.
TABLA DIAGNOSTICA ADVERTENCIA: Siempre apague el aparato y desconecte la bujia antes de hacer cualquiera de las reparaciones recomendadas a continuaciSn que no requieran que la unidad est6 en operaci6n. SlNTOMA El motor no arranoa. El motor no anda en marcha lenta como debe.
SUS DERECHOS Y OBLIGACIONES DE GARANTIA: La Agencia de Pro- tecci6n Ambiental de los Estados Uni- dos, la Junta de Recursos Ambien- tales de California y Sears, Roebuck and Co.
programada para ser reemplazada como parte del mantenimiento requeri- do deber_, estar garantizada por el periodo de tiempo que comienza en la fecha de compra inicial hasta la fecha del primer reemplazo programado para dicha pieza.
An important point after buying a device Craftsman 358.79101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 358.79101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 358.79101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 358.79101 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 358.79101 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 358.79101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 358.79101.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 358.79101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 358.79101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
