Instruction/ maintenance manual of the product 320. 61352 Craftsman
Go to page of 20
Operator's Manual n T HAMMERHEAD TM 12.0-VOLT LITHIUM-ION CORDLESS AUTO-HAMMER Model No. 320. 61352 Powered by an ENERGY STAR " quaJified battery charger for a better environment WARNING: To reduce the risk of injury, the user must read and understand this Operator's manual before using this product.
Warranty Page 2 Safety Symbols Page 3 Safety Instructions Pages 5-10 Description Pages 11-12 Assembly Page 12 Operation Pages 13-16 Maintenance Page 17 Troubleshooting Page 17 Exploded View and Parts .
The purpose of safety symbols is to attract you attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful atten- tion and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warning they give are no substitutes for proper accident prevention measures.
Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. The term "power tool" in all of the warnings listed below refer to corded power tools or battery-operated (cordless) power tools.
Keep the Auto-Hammer dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum- based products or any strong solvent to clean the hammer. Do not expose the Auto=Hammer to rain or wet conditions.
Use safety equipment. Always wear eye protection. Safety equipment, such as dust masks, non-skid safety shoes, hard hat and hearing protection, used for appropriate conditions will reduce personal injuries. Avoid accidental starting. Ensure that the switch is in the off position before plugging in.
Disconnect the plug from the power source and/or the batter pack from the power tool before making any adjustments, changing accessories, or storing power tools.
When the battery pack is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
SERVICE = Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. • When servicing a power tool, use only identical replacement parts. = Follow instructions in the Maintenance section of this manual.
KNOW YOUR HAMMER (Fig. 1) Fig. 1 Battery pack Battery pack release button Trigger switch Magnetic sleeve Hammerhead (recessed within magnetic sleeve) PRODUCT SEPCIFICATION Clamp 7/16-in. Motor 12 Volt DC Hammer Weight (without battery) 1.1 Ibs Battery Type Lithium-Ion Battery Voltage 12.
HAMMERHEAD The hammerhead impacts the nails automatically when the tool is turned on. MAGNETIC SLEEVE The magnetic sleeve holds the head of the inserted nail against the recessed hammerhead for the beginning of nail driving. The sleeve retracts at the end of nail driving to allow the hammerhead to drive the nail head flush to the workpiece.
LOW BATTERY CAPACITY iNDiCATOR • If the LED begins to rapidly flash when the trigger switch is depressed, the battery pack's power has run out, and the battery pack should be recharged. Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free power for their entire run time.
2. Make sure that the latch on the battery pack snaps into place and the battery pack is secured to the tool before beginning operation. TO DETACH BATTERY PACK (Fig. 3} ,_ CAUTION: Avoid the possibility of accidental starting: always take care not to activate the trigger switch when attaching the battery pack or making any adjustment to the tool.
HAMMERING NAILS (Fig. 6) 1. Attach the battery pack to the Auto-Hammer. 2. Secure the material to be nailed with clamps to keep it from turning when hammering. 3. Fig. 6 Insert the head of the nail into the magnetic sleeve and up against the hammerhead, where it will be held in place by magnetism.
Recommended Nails to Use The Auto-Hammer is versatile for use with a variety of nails. Nails with diameters less than 7/16-in and lengths equal to or less than 2-1/2 in. are recommended for use with this Auto-Hammer. Refer to below table for recommended nails to use with: NO.
,_, WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage.
12.0 VOLT LITHIUM-ION CORDLESS AUTO-HAMMER MODEL NUMBER 320.61352 The Model Number will be found on the Nameplate attached to the handle of the Auto-Hammer.
12.0 VOLT LITHIUM-ION CORDLESS AUTO-HAMMER MODEL NUMBER 320.61352 The Model Number will be found on the Nameplate attached to the handle of the Auto-Hammer.
Your Home For expert troubleshooting and home solutions advice: manage home www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and co.
An important point after buying a device Craftsman 320. 61352 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 320. 61352 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 320. 61352 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 320. 61352 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 320. 61352 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 320. 61352, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 320. 61352.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 320. 61352. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 320. 61352 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
