Instruction/ maintenance manual of the product 316.7454 Craftsman
Go to page of 24
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our website: www .sears.com/craftsman CAUTION: Before using this product, r ead this manual and follow all safety rules and operating instructions. Operator’ s Manual 2-in-1 PLUS ELECTRIC TRIMMER / BLOWER WEEDW ACKER ® Model No.
2 • IMPORT ANT SAFETY INSTRUCTIONS • All information, illustrations, and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. TABLE OF CONTENTS Safety Rules .
3 RULES FOR SAFE OPERATION cord length and nameplate amperage rating. If in doubt, use the next heavier size line gauge. The smaller the gauge number, the heavier the cord. To prevent the cord from disconnecting from the unit, use the cord hook shown in the Operating Instructions .
4 ONE YEAR FULL WARRANTY ON CRAFTSMAN ELECTRIC TRIMMER When used and maintained according to the operator’s manual, if this trimmer fails due to a defect in material or workmanship within one year f.
5 APPLICATIONS As a trimmer: • Cutting grass and light weeds • Decorative trimming around trees, fences, etc. As a blower: • Clean around buildings, walls, and fences • Clearing leaves and grass from around trees, shrubs, and flower beds Other optional accessories may be used with this trimmer/blower, as specified in this manual.
6 Fig. 2 CONNECTING THE CORD Use the cord hook when connecting the extension cord to the power cord outlet. This helps prevent any disconnection. 1. Make a narrow loop with the extension cord. 2. Push the loop through the opening and move it onto the hook on the motor housing (Fig.
7 HOLDING THE UNIT Before operating the unit, stand in the operating position (Fig. 2). Check for the following: • The operator is wearing eye protection and proper clothing. • The right arm is slightly bent, and the hand is holding the shaft grip.
8 HOLDING THE UNIT Before operating the unit, stand in the operating position (Fig. 11). Check for the following: • The operator is wearing eye protection and proper clothing • With a slightly-ben.
9 INSTALLING FIXED LINE Always use yellow Hassle Free IV™ XTRA QUIET Spiral Line. Li nes other than this one may make the motor overheat or fail. To install the trimming line: 1. Insert each end of the replacement line into the holes on either side of retention hook (Fig.
10 Motor type ..................................................................................................................... ...........................................A.C.,120 Volts Electric Operating RPM ......................................
11 NOTES.
12 NOTES.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our website: www .sears.com/craftsman Manual del Operador 2-in-1 PLUS ELÉCTRICO RECOR T ADOR / SOPLADOR WEEDW ACKER ® Model No.
E2 LEA TODAS LAS INSTRUCCIONES ANTES DE LA OPERACIÓN • Lea todas las instrucciones con cuidado. Conozca bien los controles y el uso correcto de la unidad. • Lea con cuidado y comprenda las instrucciones de todo el manual antes de hacer funcionar la unidad para garantizar la seguridad del operador y de las personas en los alrededores.
E3 NORMAS PARA UNA OPERACION SEGURA La tabla siguiente muestra cuál es el tamaño correcto a usar, de acuerdo con la longitud del cable y el amperaje nominal que aparece en la placa de datos de la máquina. Si está en duda, utilice el siguiente tamaño más pesado.
E4 UN AÑO DE GARANTÍA COMPLETA EN EL RECORTADOR ELÉCTRICO CRAFTSMAN Cuando se use y se le dé mantenimiento según el manual del operador, si este recortador se rompe debido a un defecto en los mat.
E5 Manija en D Mango del bastidor Interruptor de dos velocidades Gatillo del interruptor Bastidor del motor Enchufe cóncavo Cuchilla de corte de lína Accesorio de corte Bastidor del eje Protector accesorio de corte APLICACIONES Como recortadora: • Corte de césped y hierbas delgadas • Recorte decorativo alrededor de árboles, cercos, etc.
E6 INSTALACIÓN DEL PROTECTOR DEL ACCESORIO DE CORTE 1 . Ponga el extremo estrecho del protector del accesorio de corte sobre el soporte del protector en la parte posterior del cuerpo del accesorio y colóquelo de modo que el corte circular se deslice sobre la espiga del conjunto del protector (Fig.
E7 INSTRUCCIONES DE ENSAMBLE ARRANQUE/ APAGADO DE LA UNIDAD Colóquese en posición de operación (Fig. 2). Oprima el gatillo para arrancar el recortador (Fig.
E8 INSTRUCCIONES DE OPERACION RECORTE DECORATIVO El recorte decorativo se realiza eliminando toda la vegetación de alrededor de los árboles, postes, cercos, etc. Gire toda la unidad a modo de que el accesorio de corte se ubique a un ángulo de 30° con el suelo (Fig.
E9 LIMPIEZA DE LA UNIDAD Apague la unidad y desconecte de la fuente de energía . Use un cepillo pequeño o la descarga de aire del cepillo de un aspirador para mantener los respiraderos libres de obstrucciones. No use detergentes fuertes en el bastidor o en los componentes de plástico.
E10 Tipo de motor........................................................................................................................................................Eléctrico CA 120 voltios RPM de operación ......................................
E11 NOTAS.
E12 Get it fixed, at your home or ours! Y our Home For repair— in your home —of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’ s manuals that you need to do-it-yourself.
An important point after buying a device Craftsman 316.7454 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 316.7454 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 316.7454 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 316.7454 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 316.7454 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 316.7454, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 316.7454.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 316.7454. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 316.7454 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
