Instruction/ maintenance manual of the product 315.CR2000 Craftsman
Go to page of 24
PERATOR'S MANUAL MANUAL DEL OPERADOR 19,2 VOLT STRING TRIMMER 19,2 V RECORTADORA DE HILO MODEL NO. 315.CR2000 NOMERO DE MODELO 315.CR2000 A A WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
ENGLISH ESPAI_OL [] Warranty ...................................................................... 2 [] Introduction ................................................................. 2 [] Important Safety Instructions ................................
A WARNING! When using electric gardening ap- pliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. READ ALL INSTRUCTIONS [] For safe operation, read and understand all instructions before using this product.
[] Maintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 30 in. or more above the ground. [] Store idle appliances indoors - When not in use, string trimmer should be stored indoors in a dry,locked place out of the reach of children.
The following signal words andmeanings are intended to explain the levels of risk associated withthisproduct. SYMBOL SIGNAL MEANING ,_ DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
PRODUCT SPECIFICATIONS Motor ................................................................... 19.2 V DC Cutting Swath .............................................................. 12 in. Line Size ..................................................
ATTACHING GRASS DEFLECTOR See Figure 2 - 3, page L _IL WARNING: The line cut-off blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious per- sonal injury. [] [] [] Remove supplied screws with a phillips screwdriver from the trimmer head.
THREE=POSITION PIVOTING HEAD See Figure 8, page iL The trimmer head can be adjusted to three different posi- tions. [] Remove the battery pack. [] Depress the pivot button and move the trimmer head up or down to one of the three positions indicated by the notches.
EDGING See Figures 12 - 14, page iL [] Remove the battery pack. Rotate the rear handle when using the edger guide for edging sidewalks and walkways. To use the edger guide, flip down from its stored position. Always hold the string trimmer away from the body keep- ing clearance between the body and the string trimmer.
[] Insert the string into the anchor hole in the upper part of the spool. Wind the string around the upper partof the spool clockwise, as shown by the arrows on the spool. Place string in the slot on upper spool flange, leaving about6 in. extended beyond the slot.
CRAFTSMAN 19.2 VOLT STRING TRIMMER = MODEL NUMBER 315.CR2000 I he model number will be found on a label attached to the motor housing. Always mention the model number in all correspondence regarding your STRING TRIMMER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 1 3 4 8 PARTS LIST Key Part No.
12 - English.
See this section for all the figures referenced in the operator's manual. Vea esta secci6n de la pagina para todas las figuras mencion6 en el manual del operador.
A-Knob (perilla) B c A - Pivot button (boton del pivote) B-Notches 1 and 2: trimming and edging (muescas 1 y 2: rocartar y cortar bordes) C- Notch 3: storage position only (muesca 3: posicion solamente) PROPER TRIMMER OPERATING POSiTiON POSICION CORRECTA PARA EL MANEJO DE LACORTADORA A_ x,.
A iADVERTENClA! AI utilizar herramientas el_ctricas para el cuidado del jard[n, con el fin de reducir el riesgo de incendio, descargas el_ctricas y lesiones corporales, siempre deben seguirse ciertas medidas b_.
[] En el cabezal de corte use L_nicamente hilo de repuesto del fabricante original. No use ning0n otto aditamento de corte, pot ejemplo, cable met_tlico, cuerda o producto similar. Instalar cualquier otra marca de hilo de corte en esta recortadora de hilo puede producir lesiones corporales serias.
Las siguientes palabras de se_alizaci6n y sus significados tienen el objeto de explicar los niveles de riesgo relacionados con este producto. SiMBOLO SENAL SIGNIFICADO Indica una situaci6n peligrosa inminente, la cual, si no se evita, causar_, la PELIGRO: muerte o lesiones serias.
ESPECIFICACIONES Motor .................................................................. 19,2 V c.c. Ancho de corte ....................................... 305mm(12 pulg.) Diametro del hilo .............................. ] ,65 mm(0,065 pulg.) Peso (sinpaquete de bater[as) .
_k ADVERTENClA: Para evitar unarranque accidental quepodr[a causar lesiones corporales serias, siempre desmonte de la herramienta el paquete de bater[as al montarle piezas a aqu_lla. ACOPLAMIENTO DEL DEFLECTOR DE HIERBA Vea las figuras 2 y 3, pagina i.
MANGO DELANTERO AJUSTABLE Vea la figura 7, p#gina ii. El angulo del mango delantero puede ajustarse a 180 °. [] Retire el paquete de bater[as. [] Coloque la recortadora en una supefficie plana y gire la perilla hacia la izquierda para afiojar el mango.
MANGO TRASERO GIRATORIO Vea la figura 13, pagina ii. El mango trasero giratorio se utiliza junto con la gu[a para cantos. [] Retire el paquete de baterfas.
REEMPLAZO DEL HILO Vea las figuras 15 y 16, pagina ii. [] Retire el paquete de baterias. [] Quite el carrete del cabezal del hilo. NOTA: Retire todo el hilo sobrante en el carrete. [] [] Corte una pieza de hilo de aproximadamente 2,7 m (9 pies) de largo.
11 - Espa_ol.
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC ® March Registrada / TM March de Fabrica / SM March de Servicio de Sears Brands, LLC MC Marque de commerce / MD Marque de.
An important point after buying a device Craftsman 315.CR2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.CR2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.CR2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.CR2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.CR2000 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.CR2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.CR2000.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.CR2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.CR2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
