Instruction/ maintenance manual of the product 315.27994 Craftsman
Go to page of 16
Owner's Manual I ,R " ' i P O F E S S I O N A L 3/8 in. PROFESSIONAL DRILL-DRIVER Variable Speed / Reversible Double Insulated Model No. 315.279940 Save this manual for future reference _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
• Table of Contents ........................................................................................................................................................ 2 • General Safety Rules .................................................
Tool Use and Care Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hiddenwiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Additional Rules For Safe Operation Know your power tool.
SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of current --_ Direct Current Type or a characteristic of current no No Load Speed Rotational speed, at no load .
KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to operate your drill-driver, familiarize yourself with all operating features and safety require- ments. ,_ WARNING: Carefully read through this entire owner's manual before using your new drill-driver.
TWO SPEED BIT STORAGE AREA GEARTRAIN (HI-LO) AUXILIARY HANDLE KEYLESS CHUCK TORQUE SWITCH ADJUSTMENT TRIGGER RING SCREWDRIVER BITS_ DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) LOCK-ON BuIrON Fig. 1 ,_ WARNING: If any parts are missing, do not operate your drill-driver until the missing parts are replaced.
SWITCH See Figure 3. To turn your drill ON, depress the switch trigger. Release switch trigger to turn your drill OFF. FORWARD/REVERSE SELECTOR CENTERPOSITION (LOCK) SWITCH TRIGGER TO INCREASESPEED, DEPRESS SWITCH TRIGGER LOCK-ON BUTTON Fig. 3 LOCK-ON BUTTON See Figure 3.
REVERSIBLE See Figure 5. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling.
BIT STORAGE See Figure 8. When not in use, bits provided with your drill can be placed in the storage area located on the top of your drill as shown in figure 8. BIT STORAGE AREA SCREWDRIVER BITS Fig. 8 ,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating your drill.
CHUCK REMOVAL See Figure 10, 11, and 12. The chuck must be removed in order to use some accessories. To remove: • Unplug your drill. ,_i WARNING: Failure to unplug your drill could result in accidental starting causing serious injury. • Place two speed gear train in the low setting and rotate torque adjusting ring to the maximum torque setting.
I 1]=1 GENERAL All parts represent an important part of the double insulation system and should be serviced only at a Sears Service Center. Avoid using solvents when cleaning plastic pads. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
The following recommended accessories are currently available at Sears retail stores. • High Speed Bits (For wood or metal) ......... 1/2 in. Max. • Masonry Bits ............................................... 3/4 in. Max. • Wood Boring Bits ...
14.
CRAFTSMAN 318 in. PROFESSIONAL DRILL-DRIVER MODEL NO. 315.279440 I The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 318 In. PROFESSIONAL DRILL-DRIVER or when ordering parts.
Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold ifl 1-800-4-MY-HOME s_ Anyt,me, day or n,ght (1-800-469-4663) www.
An important point after buying a device Craftsman 315.27994 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.27994 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.27994 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.27994 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.27994 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.27994, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.27994.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.27994. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.27994 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
