Instruction/ maintenance manual of the product 315.27122 Craftsman
Go to page of 18
Owner's Manual iP R 0 F E S S I O N A L I 318 in. PROFESSIONAL CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.271220 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
TABLE OF CONTENTS • General Safety Rules ................................................................................................................................................. 2-3 • Specific Safety Rules/Symbols ........................
Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application.
Important Safety Instructions For Charger • Save these instructions. This manual contains important safety and operating instructions for battery charger part number 9-11040. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) rain Minutes Time "_ Alternating Current Type or a characteristic of current --= Direct Current Type or a characteristic of current no No Load Speed Rotational speed, at no load .
KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to use your drill-driver, familiarize yourself with all operating features and safety requirements. _i WARNING: Carefully read through this entire owner's manual before using your new drill-driver.
I.B/B. Brr SIOFIA6E Q'_RGE_ BA'FIB_ PACK GRBE_ UG-I]'"ON" INDCA'I_S FULLY _/_DSLOWQ-I/_NG TO f_t_Nr,_N I_._ PACK Fig. I CHARGER See Figure 2. Your charger has a "key hole" hanging feature for convenient, space saving storage.
INSTALLING BITS See Figure 3. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Open or close chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use.
TO ATTACH BATTERY PACK TO DRILL See Figure 5. Note: Battery pack is shipped in a low charge condition. Therefore, it must be charged prior to use. Refer to page 10, "CHARGING BATTERY PACK" for charging instructions. • Lock the switch trigger by placing the direction of rotation selector in center position.
_1 WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. CHARGING BATTERY PACK The battery pack for this tool has been shipped in a low charge condition to prevent possible problems.
SWITCH See Figure 8. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. SB..BC_R c_ln_l:_6nlON (LOCI<) 9NITCH 1RGGi_ Fig. 8 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure.
KEYLESS CHUCK See Figure 11. A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Arrows on the chuck indicate which direction to rotate the chuck sleeve in order to LOCK (tighten) or UNLOCK (release) the chuck jaws.
APPLICATIONS (Use drill-driver only for the purpose listed below) • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, and lami- nates. • Drilling in both hard and soft metals. • Using driving accessories, such as driving screws with screwdriver bits.
CHUCK REMOVAL See Figures 16, 17, and 18. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely.
WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power Screwdriver/Nutdriver Set and Case • 17-Pc. Power Screwdriver/Nutdriver Set and Case • High Speed Bits (For Wood or Metal).
I CRAFTSMAN 318 in. PROFESSIONAL CORDLESS DRILL-DRIVER MODEL NO. 315.271220 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 3/8 in. PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair parts.
In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-8004-MY-HOME sM (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 Au Canada pour tout le service ou les pi_ces - 1-800-469 4663 For the repair or replacement parts you need: Call 6 a.
An important point after buying a device Craftsman 315.27122 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.27122 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.27122 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.27122 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.27122 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.27122, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.27122.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.27122. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.27122 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
