Instruction/ maintenance manual of the product 315.2121 Craftsman
Go to page of 4
Owner's Manual IERRFTSMRN'I ACCESSORIES FOR MODEL NOS. 315.212100 AND 315.212110 10 in. (254 mm) COMPOUND MITER SAW Item No. _924310 _924350 Save this manual for future reference. _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
READ ALL INSTRUCTIONS • READ THESE INSTRUCTIONS AND THE IN- STRUCTIONS FOR THE 315.212100 COM- POUND MITER SAW THOROUGHLY before using accessories. • KNOW YOUR POWER TOOL.
_l, WARNING: To prevent accidental starting that could cause possible serious personal injury, assemble all parts to your saw completely before connecting it to power supply. Saw should never be connected to power supply when you are assembling parts, making adjustments, installing or removing blades or accessories, or when not in use.
STOP BLOCK See Figures 5 and 6. The stop block is useful as a stop for cutting multiple pieces to the same length. It can be installed on either table extension on either side of the saw base: • Slide the stop block on the back arm of either table extension, then insert the table extension into the saw base.
An important point after buying a device Craftsman 315.2121 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.2121 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.2121 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.2121 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.2121 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.2121, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.2121.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.2121. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.2121 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
