Instruction/ maintenance manual of the product 315.11461 Craftsman
Go to page of 18
Operator's Manual 3/8 in., 18 VOLT CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.114610 Save this manual for future reference _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
• Warranty ......................................................................................................................................................................... 2 • Introduction .................................................
• w Your drill-driver has many features for making your drilling operations more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this drill-driver making it easy to maintain and operate.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation.
_. WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. • Never usea battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion.
Important: Some ofthe following symbols may be used onyour tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow youto operate the tool better andsafer.
DRILL-DRIVER 315.114610 Maximum Torque 337 in.lb. Chuck 3/8 in. Keyiess CHARGER Item No. 9 11379 Motor DC Motor 18 Volt (1426161 ) Gear Train Two Speed Rating 120 V, 60 Hz, AC only No Load Speed 0-350/min. (Low) Charging Voltage 18 Volt 0-1300/min (High) Charge Rate 3-6 Hours Clutch 24 Positions BATTERY PACK Item No.
TWO-SPEED LEVEL GEARTRAIN (HI-LO) KEYLESS CHUCK TORQUE ADJUSTMENT RING SWITCH TRIGGER SCREWDRIVER BITS DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) BIT STORAGE REAR VIEW BATTERY PACK SHOWN IN CHARGING STAND CHARGER BATTERY PAq SHOWNINTOOL WRIST STRAP Fig.
,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. _ WARNING: Do not allow familiarity with drill- your driver to make you careless.
SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. FORWARD/REVERSE SELECTOR VARIABLE SPEED SWITCH TRIGGER Fig. 2 VARIABLE SPEED This toot has a variable speed switch that delivers higher speed and torque with increased trigger pressure.
SWITCH LOCK See Figure 5. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in center position.
INSTALLING BITS See Figure 7. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 5. • Open or close chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use.
BIT STORAGE See Figure 10. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in Figure 10. SCREWDRIVER BIT DRILLING See Figure 12. LEVEL I IL r_ i f=,...,...=...=.-= STORAGE AREA Fig.
CHUCK REMOVAL See Figures 13, 14, and 15. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 5. • Insert a 5/16 in. or larger hex key into the chuck of your drill and tighten the chuck jaws securely.
_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
.
CRAFTSMAN 3/8 in., 18 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 315.114610 .=======, l SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 4 3 Key Part No. Number 1 6613401 2 6903330 3 *Item No. 9 11378 4 *Item No. 9 11379 5 3073009 983000-341 PARTS LIST Description Quan.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Craftsman 315.11461 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.11461 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.11461 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.11461 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.11461 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.11461, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.11461.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.11461. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.11461 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
