Instruction/ maintenance manual of the product 315.11196 Craftsman
Go to page of 16
Owner's Manual CRAFTSMAN + Variable Speed / Reversible 318 in. CORDLESS DRILL-DRIVER Model No. 315.111960 Save this manual for future reference -A CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
• Warranty ......................................................................................................................................................... 2 • Introduction and Product Specifications ......................................
The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they g!ve are not substitutes for proper accident prevention measures.
RULES FOR SAFE OPERATION (Continued) • NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE • FROM OIL AND GREASE. Always use a clean cloth when cleaning.
RULES FORSAFE OPERATION (Contlnued). An extension cord should not be used Unless, absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger.
The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power Scrawddver/Nutddver Set and Case • 17-Pc. Power Screwddver/Nutddver Set and Case • High Speed Bits .
WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. ,_ WARNING: Do not allow familiarity with your drill-driver to make you careless.
SWITCH See Figure 2. To tum your drill ON, depress the switch tdgger. To tum it OFF, release the switch trigger. CENTER POSmON (LOCK) SELECTOR SWITCH TRIGGER Fig. 2 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure.
TO INSTALL BATTERY PACK • Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 3. • Place battery pack in your drill. Align raised rib inside drill with groove on battery pack. See Figure 4.
INSTALLING BITS See Figure 6. Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 3. Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck jaws.
BIT STORAGE See Figure 8. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your ddll as shown in figure 8.
_1= WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. DRILLING See Figure 11. When ddlling hard smooth surfaces use a center punch to mark desired hole location.
CHUCK REMOVAL(co_Inued) • Open chuck jaws and remove allen wrench. Remove the chuck screw by turning it in a clock- wise direction. See Figure 13. Note: The screw has left hand threads. Fig. 13 • Insert allen wrench in chuck and tighten chuck jaws securely.
BA'n'ERIES " Your drill's battery pack is equipped with 6 nickel- cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide maximum trouble free life.
CRAFTSMAN 3/8 in. CORDLESS DRILL-DRIVER MODEL NO. 315.111960 _-- I The model number will be found on a plate attached to the motor housing. Always mention the | I model number in all correspondence regarding your 3/8 in. CORDLESS DRILL-DRIVER or when I ordering repair parts.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro, 7 days a week 1-800-366-PART (1-800-366-7278) For repairservice Call24 hours a day, 7 days a week 1-800-.
An important point after buying a device Craftsman 315.11196 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.11196 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.11196 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.11196 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.11196 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.11196, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.11196.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.11196. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.11196 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
