Instruction/ maintenance manual of the product 3.75 HP 17 INCH TINE WIDTH 917.2922 Craftsman
Go to page of 32
Owner's Manual ® 3.75 HP 17 INCH TmNE WmDTH FRONT "FINE TILLER Model No. 917.292200 o Safety • Assembly o Operation o Maintenance o Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment For answers to your questions about this product, Call: 1 .
Safety Rules ................................................ 2 Warranty ..................................................... 2 Product Specifications ................................ 4 Assembly ................................................. 6 Operation .
OPERATION o Do not put hands or feet near or under rotating pad& o Exercise extreme caution when operat- ing on or crossing gravel drives, walks, or roads.
PRODUCT SPECIFICATIONS HORSEPOWER: 3.75 HP I-- DISPLACEMENT: 9.03 CU_ IN. (148CC) GASOLINE CAPACITY: 2 Quarts Unleaded Regular OIL (API-SF/SG/SH): SAE 30 (Above 32°F) CAPACITY: 20 oz.) SAE 5W-30 (Below 32°F) SPARK PLUG : Champion J19LM GAP: .030") Congratulations on your purchase of a Sears Tiller.
TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier, Standard wrench sizes are listed, (1) Utility knife (1) Pair of pliers (1) Screwdriver (2) 1/2" wrenches OPERATOR'S.
UNPACK CARTON & INSTALL HAN- DLE _CAUTION: Be careful of exposed sta- ples when handling or disposing of carton- ing material. IMPORTANT:: When uNpacking and as- sembling tiller, be careful not to stretch or kinK cable(s). = Cut cable ties securing handles.
KNOW YOUR TILLER READ THIS OWNER'S MANUALAND SAFETY RULESBEFORE OPERATING YOUR TILLER, Compare the illustrations with your tiller to familiarize yourself with the location of vari- ous controls and adjustments. Save this manual for future reference.
The operation of any tiller can result in foreign objects throwninto the eyes, which can resultin severe eye damage. Alwayswearsafety glasses or eye shields beforestarting your tiller and while tilling, We recommend a wide vision safetymask over the spectacles or standard safetyglasses.
" Tilt tiller back on its whe_ls and then re- level o With enginelevel, refillto point of over- flowing if necessary.Replace oil filler plug. o For cold weather operation you should change oil for easierstarting(See "OIL VISCOSITY CHART in the Customer Responsibilities section of this manual).
o Start engine, tip tines off ground by pressing handles down and engage tine control to start fine rotation. Allow tines to rotate for five minutes. o Check tine operation and adjust if nec- essary. See '%INE OPERATION CHECK" in the Service and Adjustments section of this manual.
MAINTENANCE _ SCHEDULE -b ¢o ILL OATES REGULAR SERVICE Check Engine Oil Level _ I_ Change Engine Oi! 6_'1, 2 Oil Pivot Points Inspect Spark Arrestor / Muffler Inspect Air Screen Clean or Replace.
Disconnect spark plug wire before per- forming any maintenance (except carbure- tor adjustment) to preventaccidental start- ing of engine. Prevent fires! Keepthe enginefree of grass, leaves, spilled oil, or fuel Remove fuel fromtank beforetipping unit for main- tenance.
Mu, MUFFLER CylinderFins Blower / Housing .j Air Screen ) Do not operate tiller without muffler. Do not tamper with exhaust system. Damaged mufflers or spark arresters could create a fire hazard.
NARROW TILLING/CULT_VATmNG - 12-3/4" PATH • Remove outer'tines. Inner Tines Only NARROW CULTIVATING - 12-1/2" PATH ° Remove inner tines, o Assemble holes "A" in tine hubs to holes "C" in tine shaft O O EDGING - 9-5/8" PATH o Remove inner tines.
Cap Nut and Cap_ _er Oe,t uor - Nut _- / TO REPLACE V-BELT Replace V-belt if it has stretched consider- ably or if it has cracks or frayed edges. Belt guard must be removed to service bell See "TO REMOVE BELT GUARD" in this section of manual.
Immediately prepare your tiller for storage at the end of the season or if the unit will not be usedfor 30 days or more,, ,_kCAUTION: Never' store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark.
PROBLEM Will not start Hard to start Loss of power CAUSE 1, OUt of fuel 2 Engine not"CHOKED" properly & Engine flooded 4_ Dirty air cleaner 5. Water in fuel 6 Clogged fueltank 7. Loose spark plug wire, 8 Bad spark plug or improper gap 9 Carburetor out of adjust- ment 1.
PROBLEM Engine overheats Excessive bounce/ difficult handling Soil balls up or clumps Engine runs but tiller won't move Engine runs but labors when tilling CAUSE 1, Low oil level/dirty oil 2 Dirty engine sir screen,. 3, Dirty engine 4. Partially plugged muffler.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 HANDLE ASSEMBLY 22 16 20 19 18 15 3 6 KEY PART DESCRIPTION KEY PART NO. NO. NO. NO. 1 137176X574 Bracket, Handle 14 74760516 2 72140512 "Bolt, Carr.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 BELT GUARD AND PULLEY ASSEMBLY _ 7 9 1 3 KEY PART DESCRIPTION KEY PART NO. NO. NO. NO. 1 23230506 *Screw, Set, Forged Socket, 15 132213 Headless 5/16-18.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 WHEEL AND DEPTH STAKE ASSEMBLY 1 6 S 15 17 18 18 1716__ 14 KEY PART NO. NO. 1 74760520 2 73220500 3 10040500 4 19121414 5 4921H 6 74780628 7 318J 8 9193.
REPAIR PARTS TILLER - - MODEL NUMBER 917,292200 TINE ASSEMBLY 6 2 5 6 KEY PART NO. NO. 1 106860X 2 4921H 3 106858X DESCRIPTION Tine, Outer, R H Clip, Hairpin line, Inner, RH KEY PART DESCRIPTION NO.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 TRANSMISSION 7 11 13 14 KEY PART NO. NO, 1 74610412 2 10040400 3 19092016 4 19091412 5 74760544 6 2606J674 7 9173R 8 !32212X574 9 10040500 10 73220500 1.
REPAIR PARTS TiLLER--MODEL NUMBER 917.292200 DECALS 1- % 2 8 KEY PART NO. NO. 1 163165 2 163322 3 110719X 4 118655X 5 120431X 6 162215 7 120075X 8 273871 9 273603 10 273873 -- 163516 -- 163517 DESCRIP.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 BRIGGS & STRATTON ENGINE -- MODEL NUMBER 94202, TYPE NO,01115-E1 635 13 308 INSTRUCTION MANUAL 15 32 26 25.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 BRIGGS & STRATTON ENGINE -- MODEL NUMBER 94202, TYPE NO.O1115-E1 200 124 _363 393 609 124_ 851 H 58_ 60 373 6s_ 455 33 • L _ 304 305 _P 26.
REPAnR PARTS TILLER - - MODEL NUMBER 917.292200 BRIGGS & STRATTON ENGINE -- MODEL NUMBER 94202, TYPE NO.01115-E1 8,4 53 1019 LABEL KIT ] REQUIRES SPECIALTOOLS TO INSTALL.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 BRIGGS & STRATTON ENGINE -- MODEL NUMBER 94202, TYPE NO.01115-E1 KEY PART DESCRIPTION KEY PART NO. NO.
REPAIR PARTS TILLER - - MODEL NUMBER 917.292200 BRIGGS & STRATTON ENGINE -- MODEL NUMBER 94202, TYPE NO.01115-E1 KEY PART NO. NO. 200 495213 201 263174 202 262470 209 260041 216 263188 222 499533 .
30.
.
=or the repair or replacement parts you need :lelivered directly to your home 3all 7 am - 7 pm, 7 days a week 1-800=366-PART I1-800-366-7278) Para ordenar piezas con entrega a domicilio - 1-800-659-70.
An important point after buying a device Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 3.75 HP 17 INCH TINE WIDTH 917.2922 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
