Instruction/ maintenance manual of the product 247.370320 Craftsman
Go to page of 19
I OWNER'S MANUAL MODEL NO. 247.370320 Caution: Read and Follow All Safety Rules and Instructions Before Operating This Equipment CRRFTSMRN® 1 IOV 12AMP ELECTRIC DOUBLE INSULATED 18" REAR DISCHARGE ROTARY LAWN MOWER Assembly Operation Maintenance Service and Adjustment Repair Parts SEARS, ROEBUCK AND CO.
IMPORTANT RULES FOR SAFE OPERATION THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY_ AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATI-EMPTING TO OPERATE YOUR ELECTRIC LAWN MOWER.
SAFE OPERATION PRACTICES (Continued) • DO not force lawn mower. It will do the job better and safer at the rate for which it was designed. Do not use lawn mower for any job except that for which it is intended. • Mow across the face of slopes, never up-and-down.
TABLE OF CONTENTS SAFETY RULES ............................ 2 PRODUCT SPECIFICATIONS ................. 3 CUSTOMER RESPONSIBILITIES .............. 3 INDEX .................................... 4 WARRANTY ............................... 4 CONTENTS OF HARDWARE PACK .
CONTENTS OF HARDWARE PACK (Hardware pack may contain extra Items which are not used on your unit. Part numbers are shown In parentheses.) Cord Restr; Hand (725-0899) Knobs TONGUE Cable Tie (7i6-0306) .
Cord Hand Knob Restraint Tongue Bolts Washer ATTACHING THE HANDLE • Lay the upper handle to the right side of the mower so the control cord is out of the way. • Pull up and back on the lower handle until it locks into operating position, • Attach the upper handle as follows.
OPERATION KNOWYOUR LAWN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Com- pare the illustrations with your lawn mower to familiarize yourself with the location of various controls and ad- justments. Save this manual for future reference.
HOW TO USE YOUR MOWER MOTOR/BLADE CONTROL WARNING: THE MOTOR/BLADE CON- TROL ON THIS MOWER 18 INSTALLED TO MINIMIZE THE RISK OF BLADE CONTACT INJURY AND IS REQUIRED BY FEDERAL REGULATIONS, DO NOT UNDER ANY CIR- CUMSTANCES ATTEMPT TO DEFEAT THE FUNCTION OF THE MOTOR/BLADE CONTROL.
TO START MOTOR AND ENGAGE BLADE Standing behind the unit, lift the motor/blade control handle with the left forefinger, then pull handle up and hold it against the upper handle with right hand. See figure 7. FIGURE 7. TO STOP MOTOR AND BLADE 1. Release the motor/blade control handle to stop the engine and blade.
MAINTENANCE GENERAL RECOMMENDATIONS Follow the Service Recommendation Schedule on page 11. MOWER BLADE CARE Your mower will work better with a sharp blade. _b WARNING: DISCONNECT POWER SUP- PLY BEFORE PERFORMING ANY MAIN- TENANCE OR ADJUSTMENTS. TO REMOVE BLADE (See figure 9): • Turn mower on its side.
STORAGE Your mower should be prepared for off-season storage as follows: the hand knobs which secure the upper and lower handles. MOWER • Clean underside of mower housing (See "CLEAN- ING" in Maintenance section of manual), • Inspect and replace/sharpen blade, if required (See "BLADE CARE" in Maintenance section of manual).
TROUBLE SHOOTING GUIDE Trouble Correctlve Action Does not start Engage motorlblede control. Be sure that the extension cord is plugged into the outlet and the lawn mower switch plug. Check to see if a fuse has been blown or a circuit breaker tripped in your electrical box.
USE THIS SHEET AS A GUIDE TO DETERMINE SLOPES WHERE YOU MAY NOT OPERATE SAFELY. ! 15 ° Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2_ feet every 10 feet). If operating a walk.behind mower on such a slope, it is extremely difficult to maintain your footing and you could slip, resulting in serious injury.
SEARS CRAFTSMAN 18" ELECTRIC ROTARY MOWER MODEL NO. 247.370320 ,e or P.rts IAWA. NO--or.e__ com 1 ponents. It is important that all parts be reassembled in positions shown.
SEARS CRAFTSMAN 18" ELECTRIC ROTARY MOWER MODEL NO. 247.370320 Repair Parts KEY PART NO. NO. 1 750-0289 2 748-0343 3 710-1006 4 5 6 712-0296 732-0478 710-1220 8731-1218 9 731-1217 10 710-0451 11 .
SEARS CRAFTSMAN 18" ELECTRIC ROTARY MOWER MODEL NO. 247.370320 Repair Parts 17 /3 27 KEY NO. 2_ 3i 4 5 6 7 8 9 10 11 12 PART NO. 71 (_0255 736-0329 720-0236 732-0675 738-0137 738-0811 731-1128 747-0589 747-0802 714-0104 17521 17800 DESCRIPTION KEY PART NO.
SEARS CRAFTSMAN 18" ELECTRIC ROTARY MOWER MODEL NO. 247.370320 Repair Parts & WARNING: Insulators are safety com- ponents. It Is Important that all parts be reassembled in positions shown. Ser- vice replacement motors are supplied with insulators attached.
SEARS CRAFTSMAN 18" ELECTRIC ROTARY MOWER MODEL NO. 247.370320 Repair Parts KEY NO. 101 102 103 104 105 106 107 108 109 111 112 113 114 115 116 117 119 120 123 124 PART NO.
8 _A/R8 OWNER'S MANUAL MODEL NO. 247.370320 HOW TO ORDER REPAIR PARTS [RRFTSMRN® 1 IOV 12AMP ELECTRIC DOUBLE INSULATED 18" REAR DISCHARGE ROTARY LAWN MOWER Each lawn mower has its own model number. The model number for your lawn mower will be found on a label attached to the rear of the deck.
An important point after buying a device Craftsman 247.370320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 247.370320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 247.370320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 247.370320 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 247.370320 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 247.370320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 247.370320.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 247.370320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 247.370320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
