Instruction/ maintenance manual of the product 137.2191 Craftsman
Go to page of 12
Owner's Manual ® Bench Mode_ 1/2 HP (Maximum Developed) 5 Speeds (540 = 3600 R,PoMo) !/2 inch Chuck 104NCH DR_LL PRESS Model No° 137o219100 CAUTmON °o Before using this Dril! Press, read this manual and foltow at! its Safety Rules and Operating Instructions.
SECTION PAGE Warranty ................... " ..... 2 Product Specifications ........... . .......................................... 2 Safety instructions ......................................................... 3 Accessories and Attachments ....
z SPECnFIC SAFETY NSTRUCTMONS FOR THE DR LL PRESS I4. SECURE WORK. Use clamps or a vise to hold the work when practical. It's safer than using your hand and it Frees both hands to operate tool.
AVAILABLE ACCESSORIES Use only accessories recommended [or this drill press. Follow instruction, s that accompany accessories, Use of improper accessories may cause hazards.
Spindle pulley Motor pulley Depth scale stop nuts Depth scale pointer Cord clamp Belt tension knob Feed spring Column collar Bevel scale Table suppo_ Depth scale indle Feed stop rod Depth stop Cove r ON/OFF switch w/key Eeed handle Chuck Support .eck handle Base Bevel lock Table Fence end__ Fence backstop Head lock screw _b tor _.
ASSEMBLY tNSTRUCTMONS For your own safety, never connect plug to power source outlet until af! assembly and adjustment steps are completed, and you have read and understood the safety and operating instructions. TOOLS NEEDED c_ot[ed screwdriver Combination wrench 8" & 10" Adjustabfe wrenches Combination square.
_NSTALMNG FEED HANDLES (FIG. H) 1. Locate three feed handles in the loose parts bag. 2. Screw the feed handles (1) into the threaded holes (2) in the hub (3). Tighten. INSTALLING THE CHUCK (FIG. t, J and K) t. Clean out the tapered hote in the chuck (1) with a clean cloth.
To prevent personal injury, always disconnect the plug from the power source when making any adjustments. SQUARING TABLE TO HEAD (FIG. O, P) NOTE: The table and support has a predrilled hole with a locking pin inserted for locking thetable to a predetermined 0° horizontal position.
BASIC DRILL PRESS OPERATIONS SPEEDS AND BELT PLACEMENT (FIG. T) This drill press has 5 speeds, as listed below: 540 RPM 880 RPM 1600RPM 2610 RPM 3600 RPM See inside of the belt guard for specific placement of the belts on the pulleys to change speeds.
REMOVING CHUCK (FIG. Z) 1. With theswitch "OFF", open the jaws of the chuck as wide aspossible by turning the chuck counterclockwise. 2. Tap the chuck (1) lightly with a plastic tipped hammer at the top of chuck, until the chuck releases. NOTE: Place one hand below thechuck tocatch it when it falls out.
-i MA NTAH a NG YOUR DR LL PRESS For your own safety, turn the switch OFF and remove the plug from the power source outlet before maintaining or _ubricating your drill press. Frequentiy blow out using an air compressor or dust vacuum, any dust that accumulates inside the motor.
!0" DRILL PRESS PARTS LIST MODEL NO. !37.2!9100 10" DRILL PRESS PARTS LiST MODEL NO. 137.219100 When servicing use only CRAFTSMAN replacement parts.
An important point after buying a device Craftsman 137.2191 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 137.2191 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 137.2191 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 137.2191 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 137.2191 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 137.2191, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 137.2191.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 137.2191. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 137.2191 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
