Instruction/ maintenance manual of the product 118.22000 Craftsman
Go to page of 15
Operator's Manual I;RRFTSMRN+I 7-in. Tile Wet Saw with LASER TRAC TM Model No. 118.22000 A z-_CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product. • WARRANTY • SAFETY • ASSEMBLY • OPERATION • MAINTENANCE Sears, Roebuck and Co.
I I I I Warranty .................................................................... Page 2 Safety Symbols .................................................. Page 3 Safety Instructions ............................................... Pages 3-11 Description .
I I I I HAZARD SYMBOLS Some of the followingsymbols may be used on thistool. Please study them and learn their meaning.Proper interpretation of these symbolswill allow you to operate the tool better and safer.
I I I I TOOL USE AND CARE SAFETY z:_WARNING: BE SURE to read and understand all instructions before operating this saw. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 1. BE SURE the splash guard is intact and in good condition.
I I I I i 1 EXTENSION CORDS 1. USE ONLY 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that will accept the tool's plug.
I I I I SAFETY RULES FOR TILE WET SAWS cont. 6. NEVER try to cut freehand. Make sure that the tile to be cut is pressed firmly against the rip fence. 7. NEVER cut pieces too small to be held securely against the fence without leaving enough space for your hand to be a safe distance from the blade.
I I I I KNOW YOUR SAW (Fig. 3) Your tile wet saw has a precision-built electric motor and it should only be connected to a 1 20-volt, 60Hz AC ONLY power supply (normal household currant). DO NOT operate on direct current (DC). The large voltage drop would cause a loss of power and the motor would overheat.
I I I I 1. Place carton on the floor in an area with sufficient space to inspect your saw. 2. Remove carton and packing materials from around tool. 3. Inspect the saw for loose or damaged parts. If any parts are damaged or missing, return the saw to your nearest Sears Store to have it replaced.
I I I I MOUNTING LASER SYSTEM 1. Locate laser package and find the following parts as shown in (Fig. 14): a) Laser light system. b) Two 6/32 screws with washers. 2. Loosen bolt and remove cover. Install two AAA batteries (Fig.15), making sure both terminals are positioned correctly as the marks on the cover show, then replace cover.
I I I I z_WARNiNG:Turn off the saw and remove the plug from the outlet BEFORE adding or removing accessories and making adjustments. Failure to unplug the saw could result in accidental starting causing possible serious injury ACAUTION: This tile saw is designed to work with water.
I I I I MOVING THE SAW cont. 4. Your tile wet saw has been equipped with a set of wheels for easy transporting. They are to be used when the legs of the saw table are in the closed, or folded up position. To use wheels, simply pull out and down on the black handle located on the wheels' axle (Fig.
I I I I REPLACING THE PUMP Only use identical replacement parts, available at your Sears Parts and Repair Center. To locate a Sears Parts and Repair Store near you, call the 800 number located on the back of this manual. 1. Remove the water tray from the saw table.
I I I I oJ 24 / 0 0 _. 0 o 0 • 0 C 0__ W 0;0; _zc C O0 ° I ON- -- C _z-_ oN O __1 E | b., 6 0. F, O. 6 O. i- 0 ii 0 O 0. e,l cO ooo o o o oJ oJ oJ oJ __< T _, ooo o o o oJ oJ oJ oJ o o rn 03 o o o oJ oJ r_ oooooo oooooo oooooo _O__ OOOOOOOO OOOOOOOO OOOOOOOO _=_ a __*_= __o _II 0 I_ 00 o o o o o o oJ oJ 0J 0J .
NOTES 26 NOTES 27.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling system, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Craftsman 118.22000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 118.22000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 118.22000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 118.22000 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 118.22000 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 118.22000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 118.22000.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 118.22000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 118.22000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
