Instruction/ maintenance manual of the product 113.29931 Craftsman
Go to page of 8
Owner's Manual II:RRFTSMRN'I RAILS AND FENCE SYSTEM FOR CRAFTSMAN 10 in. TABLE SAWS MODEL NOS. 315.228310, 315.228410, 315.228510, 113.299310, 113.299410, 113.299510 Item No. _929993 TABLE SAW NOT INCLUDED Save this manual for future reference.
READ ALL INSTRUCTIONS • READ THESE INSTRUCTIONS AND THE INSTRUCTIONS FOR YOUR TABLE SAW THOROUGHLY before using accessories. KNOW YOUR POWER TOOL. Read the owner's manual for the Table Saw carefully. Learn the saw's applications and limitations as well as the specific potential hazards related to this tool.
REMOVING THE SWITCH AND RAILS • Remove the front rail end caps. • Under the front rail, loosen the switch screws and slide the switch off of the rail.
INSTALLING THE REAR RAIL A'_ WARNING: Front and rear rails must be carefully aligned to reduce the risk of kickback, which can cause serious injury. • From the carton, remove the rear rail and the following hardware: Right and left end caps for rear rail 2 screws (5/32-32 x 1/2 in.
INSTALLING THE FRONT RAIL • Locate the front rail and the following hardware: Right and left end caps for front rail 2 screws (5/32-32 x 1/2 in.) for end caps • Set aside the end caps and two screws until the switch has been installed.
• Insert the two remaining pan head screws into holes in the fine adjustment knob bracket. • Attach the fine adjustment knob bracket to the bottom of the fence head on the right or the left side of the fence handle. Securely tighten the two screws.
ALIGNING THE RIP FENCE AND FRONT RAIL • The rip fence scale indicator is installed on the right side of the rip fence but can be removed and rein- stalled on the left side if needed.
CHECKING RIP FENCE AND. BLADE ALIGNMENT The rip fence is self-aligning but should be checked before first use. _. WARNING: Failure to align the rip fence to the blade can cause jams and kickback, resulting in serious personal injury. • Slide the rip fence to the miter gauge groove, which is parallel to blade.
An important point after buying a device Craftsman 113.29931 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 113.29931 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 113.29931 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 113.29931 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 113.29931 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 113.29931, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 113.29931.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 113.29931. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 113.29931 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
