Instruction/ maintenance manual of the product 11145 Craftsman
Go to page of 12
OWNERS MANUAL MODEL NO. 315.111450 CAUTION: Read Rules for Safe Operation and instructions Carefully SAVE THIS MANUAL FOR FUTLIRE REFERENCE 3/8 INCH CORDLESS DRILL SINGLE-SPEED- REVERSIBLE Introduction Operation Designed exc_usive}y for arid sold only by SEARS, ROEBUCK AND CO, Dept 698/73tA, Sears Tower.
FULL ONE YEAR WARRANTY ON CRAFTSMAN CORDLESS DRILL If this Craftsman Cordless Drill falls to give complete satisfaction within one year from the date of put.- chase, RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and Sears wilt replace it, free of charge.
RULES FOR SAFE OPERATION (CONTINUED) !4,. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see thdt keys and adjusting wrenches are removed from tool before turning it on, 15.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER 1. SAVE THESE INSTRUCTIONS° This manual contains important safety and operating instructions for battery charger Part Number 999555-007. 2. Before using battery charger, read atl instructions and cautionary markings in this manual, on battery charger, and product using battery charger.
OPERATION KNOW YOUR DRILL See Figure 1_ Before attempting to use your drill, familiarize yourself with el! operating features and safety re- quirements, If any pads are missing do not operate your drill untie the missing parts are replaced. CHARGING YOUR DRILL Your drill has been shipped in a low charge condition to prevent possible problems.
BATTERIES OPERATION Your ddtl is equipped with 5 nickel-cadmium rechargeabte batteries Length of service from each charging will depend on the type of work you are do- ing '[he nickel,.cadmium batteries in this tool have been designed to last for the life of the unit under normal operating conditions.
OPERATION INSTALLING BITS ---- .... 1 Lock switch trigger on your ddtt by placing the direction of rotation selector in center position. 2 Close chuck jaws to a point where the opening is slightly lar.
DRILLING OPERATION (Cont.) The material to be drilled should be secured in a vise or with ciamps to keep it from turning as the drill bit rotates Hold your drill lirmly and place the bit at the point .
MAINTENANCE GENERAL Avoid using solvents when cleaning plastic parts Most plastics are susceptible to various types of oommeP cial solvents and may be damaged by their use, Use clean cloths to remove dirt, dust, oil, grease, etc, ACCESSORIES ...... THE FOLLOWING RECOMMENDED ACCESSORIES ARE CURRENT AND WERE .
NOTES Page 10.
NOTES Page 11.
OWNERS MANUAL SERVICE MODEL NO. 315.111450 HOW TO ORDER REPAIR PARTS ............ :: ,L,Im. 1" 3/8 INCH CORDLESS DRILL SINGLE-SPEED REVERSIBLE Now that you have purchased your Drill, shoutd a nee.
An important point after buying a device Craftsman 11145 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 11145 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 11145 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 11145 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 11145 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 11145, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 11145.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 11145. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 11145 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
