Instruction/ maintenance manual of the product 250 Cornelius
Go to page of 11
IMPORT ANT : TO THE INST ALLER. It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment is provided with protection against backflow by an air gap as defined in ANSI/ASME A1 12.1.2-1979; or an approved vacuum breaker or other such method as proved effective by test.
i 92108 T ABLE OF CONTENTS Page MAINTENANCE 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DAIL Y (OR AS REQUIRED) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 92108OPR MAINTENANCE The following dispenser maintenance should be performed at the intervals indicated: DAIL Y (or as required) Remove foreign material from vending area drip tray to prevent drain blockage. WEEKL Y (or as required) Clean vending area.
2 92108OPR DISPENSER 1. CLEANING EXTERIOR SURF ACES Important: Perform the following daily . A. Remove the cup rest from drip tray . B. W ash the drip tray with soap solution. Rinse with clean water and allow solution to run down the drain. C. W ash cup rest with soap solution and rinse in clean water .
3 92108OPR BEVERAGE SYSTEM (IF APPLICABLE) CLEANING W ARNING: Disconnect Power Before Cleaning! Do not use metal scrapers, sharp objects or abrasives on the ice storage hopper , top cover and the agitator disk, as damage may result. Do not use solvents or other cleaning agents, as they may attack the plastic material.
4 92108OPR 1 1. For post-mix valves, remove the nozzle and syrup dif fuser and clean them in a mild soap solution. Rinse with clean water , then reinstall the nozzle and syrup diffuser on the valve.
5 92108OPR W ARNING: Disconnect Power Before Cleaning ! Soap solution – Use a mixture of mild detergent and warm (100 _ F) potable water . Sanitizing solution – Use ½ ounce of household bleach in 1 gallon of potable water . Preparing the sanitizing solution to this ratio, the required solution of 200 PPM will be obtained.
6 92108OPR W ARNING: If repairs are to be made to a product system, remove quick disconnects from the applicable product tank, then relieve the system pressure before proceeding. If repairs are to be made to the CO 2 system, stop dispensing, shut off the CO 2 supply , then relieve the system pressure before proceeding.
7 92108OPR T rouble Probable Cause BEVERAGE NOT SWEET ENOUGH. A. Empty syrup tank. B. Faucet brix requires adjusting. BEVERAGES NOT COLD (UNITS WITH BUIL T – IN COLD PLA TE). A. Unit standing with no ice in hopper – no ice in cold plate cabinet. FLA VOR SYRUPS DO NOT DISPENSE A.
8 92108OPR W ARRANTY IMI Cornelius Inc. warrants that all equipment and parts are free from defects in material and workmanship under normal use and service. For a copy of the warranty applicable to your Cornelius, Remcor or Wilshire product, in your country , please write, fax or telephone the IMI Cornelius office nearest you.
One Cornelius Place Anoka, Minnesota 55303-6234 (763) 421-6120 (800) 238-3600 Corporate Headquarters: IMI CORNELIUS INC..
An important point after buying a device Cornelius 250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cornelius 250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cornelius 250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cornelius 250 you will learn all the available features of the product, as well as information on its operation. The information that you get Cornelius 250 will certainly help you make a decision on the purchase.
If you already are a holder of Cornelius 250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cornelius 250.
However, one of the most important roles played by the user manual is to help in solving problems with Cornelius 250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cornelius 250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
