Instruction/ maintenance manual of the product V90229-1T Cooper Lighting
Go to page of 3
A MOUNTING CHANNEL BUTTERFLY MOUNTING BRACKETS HEX SCREW Figure 1 JBOX JBOX COVER SCREW HOUSING TRIM TORSION SPRING CEILING MATERIAL HOUSING TRIM FIXTURE MOUNTING: 1. Fixture must be mounted using either BUTTERFLY MOUNTING BRACKETS or HANGER BARS (Contact RSA Dealer for HANGER BARS).
COVER RING BACK RING COIL SPRING LAMP (MR16 shown, COIL SPRING behind) BACK RING SOCKET ASSY PIVOT JOINT (FOR GIMBAL TIGHTENING) OPTICAL ACCESSORY ACCESSORY RETAINER RING COVER RING SNOOT Flush Position Regressed Position CEILING LINE 11.
GIMBAL BRACKET (Standard Position) SLOT SET SCREW SNOOT GIMBAL RING GIMBAL BLOCK 17. Once removed, flip the two (2) GIMBAL BRACKETs around (180°) and tighten the joint if necessary. See Fig. 9. If necessary, please see Step 21 for gimbal tightening instructions.
An important point after buying a device Cooper Lighting V90229-1T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cooper Lighting V90229-1T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cooper Lighting V90229-1T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cooper Lighting V90229-1T you will learn all the available features of the product, as well as information on its operation. The information that you get Cooper Lighting V90229-1T will certainly help you make a decision on the purchase.
If you already are a holder of Cooper Lighting V90229-1T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cooper Lighting V90229-1T.
However, one of the most important roles played by the user manual is to help in solving problems with Cooper Lighting V90229-1T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cooper Lighting V90229-1T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
