Instruction/ maintenance manual of the product 60502B Agilent Technologies
Go to page of 11
OPERATING MANUAL 300 WATT ELECTRONIC LOAD MODULE Agilent Model 60502B FOR MODULES WITH SERIAL NUMBERS: 3118A-00101 AND ABOVE Agilent Part No. 60502-90008 Printed in U.
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name : Agilent Technologies Manufacturer’s Address: New Jersey Division 140 Green Pond Road Rockaway, NJ 07866 U.
1 300-Watt Module About This Manual This manual provides information for the Agilent 60502B 300-Watt Electronic Load Module. It is designed as a supplement to the Agilent 6050A/6051A Multiple Input Mainframe Electronic Load Operating Manual (part number 06050- 90001).
2 Table 60502-1. Specification and Supplemental Characteristics SPECIFICATIONS DC Input Rating: Current: 0 to 60 A Voltage : 3 V to 60 V (minimum dc operation from 0 to 2 V for 0 to 60 A) Power: 300 W at 40 ° C (derated to 225 W at 55 ° C) A. OPERATING CHARACTERISTICS B.
3 Table 60502-1 Specifications and Supplemental Characteristics (continued) Transient Operation: Continuous Mode Frequency Range: 0.25 Hz to 10 kHz Frequency Resolution: 4% Frequency Accuracy: 3% Duty Cycle Range: 3% to 97% (0.
4 Table 60502-1 Specifications and Supplemental Characteristics (continued) External Analog Programming 0 to 10 V (dc or ac): Bandwidth: 10 kHz (3 db frequency) Accuracy: ± 4.
5 Table 60502-1 Specifications and Supplemental Characteristics (continued) Current Slew Rate:* Rate # 60 A Range Step 6 A Range Step Transition Time 1 1 A/ms 0.1 A/s 8.0 ms 2 2.5 A/ms 0.25 A/s 3.2 ms 3 5 A/ms 0.5 A/s 1.6 ms 4 10 A/ms 1 A/ms 800 µ s 5 25 A/ms 2.
6 Table 60502-1 Specifications and Supplemental Characteristics (continued) Source Turn-On Current Overshoot: Less than 10% of final value (in CC and CR modes when connected to power supplies with voltage rise times of greater than 500 µ s). Programmable Short Circuit: 0.
7 Table 60502-2. Programming Ranges (continued) Function Front Panel Front Panel HPSL Command Range of Values Key Display (Short Form) Transient Operation Set Frequency FREQ value "TRAN:FREQ value" 0.25 Hz to 10 kHz Set Duty Cycle (shift) DCYCLE value "TRAN:DCYC value" 3-97% (0.
8 Table 60502-4. Calibration Information Ranges and Calibration Points Variables Variables Value Power Supply Settings Current Shunt High Current Range Hi_curr_rng 60 5 V/61 A 100 A High Current Offset Hi_curr_offset 0.0282 Low Current Range Lo_curr_rng 6 5 V/10 A 15 A Low Current Offset Lo_curr_offset 0.
9 Agilent Sales and Support Office For more information about Agilent Technologies test and measurement products, applications, services, and for a current sales office listing, visit our web site: http://www.agilent.com/find/tmdir You can also contact one of the following centers and ask for a test and measurement sales representative.
An important point after buying a device Agilent Technologies 60502B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Agilent Technologies 60502B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Agilent Technologies 60502B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Agilent Technologies 60502B you will learn all the available features of the product, as well as information on its operation. The information that you get Agilent Technologies 60502B will certainly help you make a decision on the purchase.
If you already are a holder of Agilent Technologies 60502B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Agilent Technologies 60502B.
However, one of the most important roles played by the user manual is to help in solving problems with Agilent Technologies 60502B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Agilent Technologies 60502B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
