Instruction/ maintenance manual of the product IMI-694 Cooper Lighting
Go to page of 5
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH NOTE : Use minimum 90°C supply wire rating for connections in J-box. Fixture Orientation Guideline: Proper orientation of luminaire may vary based upon design requirements specified per given application.
5. Lift up luminaire onto the (4) four hooks of quick mount plate while guiding the wires through center access hole (Figure 3). 6. Push luminaire forward for engagement (Figure 3). When it reaches the full-engaged position, a “CLICK” can be heard.
LAMP INSTALLATION: : 1. To install the lamp, unlatch both latches (Figure 6). Note: Remove tamper proof screws first if luminaire includes (TR) tamper-resistant option (Figure 4). 2. Allow lens to swing open (Figure 7). Lens will remain captive. CAUTION : Support lens while it swings open.
TRUNNION MOUNT INSTALLATION: (Figure 11) Note: Use minimum 90°C supply wire when installed per below procedure and connections are made inside of condulet body. Note: For 8-3/8” to 13-1/4” vertical adjustment (Up or Down only). 1. Install top trunnion on the ceiling using masonry anchors (provided by others).
THRU-BRANCH WIRING INSTALLATION: (Figure 13 & 14) NOTE : Use 90°C wire rating for luminaire with thru-branch option for fixtures 100w or below at 25°C ambient temperature applications.
An important point after buying a device Cooper Lighting IMI-694 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cooper Lighting IMI-694 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cooper Lighting IMI-694 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cooper Lighting IMI-694 you will learn all the available features of the product, as well as information on its operation. The information that you get Cooper Lighting IMI-694 will certainly help you make a decision on the purchase.
If you already are a holder of Cooper Lighting IMI-694, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cooper Lighting IMI-694.
However, one of the most important roles played by the user manual is to help in solving problems with Cooper Lighting IMI-694. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cooper Lighting IMI-694 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
