Instruction/ maintenance manual of the product IMI-685 Cooper Lighting
Go to page of 4
Tools Required Socket, 5/16" Socket, 3/4" Deep Well Socket, Electrical wiring tools. NOTE: these luminaires are designed for outdoor lighting services, and should not be used in area of limited ventilation or in high ambient temperature enclosures.
Mounting the fixture 4a. Arm Mount (FIG. 4a) • Arm Mounting (Square Pole) Lay the fixture on its’ top with door removed. Remove pole cap allowing nut plate to be inserted into pole and align with bolt holes. Install threaded bolts into nut plate. Align arm (end with drain holes towards pole) and place over threaded bolts.
4c. Slipfitter Mount (FIG. 4c) • The integral slipfitter can be mounted on 2" (2 3/8" O.D.) pipe. Set screws and a thru bolt are provided to clamp it securely to the tenon. Thru bolt will require a drilled hole thru the arm or tenon. Use the slipfitter as a pattern to drill the thru hole.
Tools Required Socket, 5/16" Socket, 3/4" Deep Well Socket, Electrical wiring tools. NOTE: these luminaires are designed for outdoor lighting services, and should not be used in area of limited ventilation or in high ambient temperature enclosures.
An important point after buying a device Cooper Lighting IMI-685 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cooper Lighting IMI-685 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cooper Lighting IMI-685 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cooper Lighting IMI-685 you will learn all the available features of the product, as well as information on its operation. The information that you get Cooper Lighting IMI-685 will certainly help you make a decision on the purchase.
If you already are a holder of Cooper Lighting IMI-685, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cooper Lighting IMI-685.
However, one of the most important roles played by the user manual is to help in solving problems with Cooper Lighting IMI-685. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cooper Lighting IMI-685 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
