Instruction/ maintenance manual of the product Radio Cooper Hand Tools
Go to page of 21
WR 3M - Operating Instructions 1 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Device Overview 1 Channel Selection LED Indicator 2 Heater Power LED Indicator 3 Vacuum “On” LED 4 L.
Page 2 of 21 WR 3M Table of Contents 1 Instructions 2 2 Cautions and Warnings 2,3 3 Packing List 3 4 Description 3,4 5 Initial Set-up 5 6 Operating Guidlines 6 7 Special Functions 8 8 Maintaining and .
WR 3M Page 3 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Safety Information: z Always place the solderi ng iron in its original holder z Remove all inflammable objects from the proximity of the hot soldering tool. z Use suitable protective clothi ng to prevent the risk of burns associated with molten solder.
Page 4 of 21 WR 3M The desired temperature can be adjusted in the range of 150°F t o 999°F for hot-air tools and the WSP150 Soldering Iron; 150°F to 850°F for all other soldering / desoldering tools. Set and Read values are displayed in digital form.
WR 3M Page 5 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT The Weller WR 3M Rework Station offers the following additional features / functions: − Automatic tool detection and acti .
Page 6 of 21 WR 3M − can remotely control the unit and chart, store and print temper ature curves ("Monitor Software“). 5 Initial Set-up WARNING! • Risk of injury may occur i f vacuum hose is incorrectly connected to the air port (15).
WR 3M Page 7 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT − LED lit green constantly indicates that the connected tool is being heated up.
Page 8 of 21 WR 3M 2. Depress the UP or DOWN Scroll Key. The display switches to the set value. The temperature symbol (18) flashes. 3. Depress the UP or DOWN Scroll Key to set the desired temperature: - Tapping the Scroll Keys changes the Set temperature by one degree.
WR 3M Page 9 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT 2 s ➾ Menu 1 4 s ➾ Menu 2 1x ➾ ON/OFF 2. The current air flow in percent age is shown in the display for approximately 2 seconds. 3. Set the desired flow by Depressing the UP or DOWN Scroll Key.
Page 10 of 21 WR 3M 1. Select the desired channel ┌ 1 ┐ , ┌ 2 ┐ or ┌ 3 ┐ for entering the special functions. 2. Depress and hold down the UP and DOWN Scroll Keys simultaneously. "– 1 –“ appears in the display after 2 seconds. 3.
WR 3M Page 11 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Setting the Automatic “Switch-Off” Time (AUTO-OFF) When the soldering tool is not i n use, heating of the soldering tool is switched off after the AUTO-OFF time has elapsed.
Page 12 of 21 WR 3M 1) Not in use = UP/DOWN Scroll Keys not depressed and no temperat ure drop > 41 °F. 2) STANDBY temperature must be below the Set temperature, otherwi se the SETBACK function is inactive. 3) When a switching holder is connec ted, the soldering tool alway s remains at the Set temperature outside the holder.
WR 3M Page 13 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT the airflow is activated as l ong as the push-button on the hot- air pencil is depressed. 1. Select the menu item HAP-On in Menu 1. 2. Set the time value with the UP or DOWN Scroll Key.
Page 14 of 21 WR 3M 2. Enter the 1, 2, or 3-digit LOCK code with the UP or DOWN Scroll Key. 3. Depress Radio Button ┌ 3 ┐ . The Station is now unlocked. Resetting the Special Functi ons to Factory Default Settings 1. Select the Special Functions Menu 1 .
WR 3M Page 15 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT requires a Station Identificati on (ID code) so that it can clea rly be identified. 1. Select the menu item REMOTE ID in Menu 2. 2. Enter an ID with the UP or DOWN Scroll Keys (possible values 0 – 999).
Page 16 of 21 WR 3M 2. Select the menu item FCC in Menu 2. 3. Depress the UP Scroll Key. Control point 842 °F / 450 °C is selected. The soldering tip is now heated to 842 °F / 450 °C. The Heater Control Indicator flashes ( a ) (21) as soon as the temperature is constant.
WR 3M Page 17 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT WARNING! Vacuum pump will be destr oyed if operated without the filter. Z Check to ensure the filters are in place before operating unit. Replacing the filter 1. Turn the cover cap for "Vac“ (14) or "Air“ (15) 45° counterclockwise and remove.
Page 18 of 21 WR 3M − Clean desoldering tool – replace filter − Check vacuum hose 10 Accessories 0052918399 WMRP Micro Soldering-tip set, 40 W; WDH 30T Stand, RT3 tip.
WR 3M Page 19 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT 0058761732 Desoldering set 18/15.5/12.5/10 with pick-up 0051512499 WDC Weller Dry Tip Cleaner 0051512599 WDC 2 Dry Tip Clea.
Page 20 of 21 WR 3M THE PERIOD OF ALL IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS, OR FITNESS FOR A PARTICULAR PURPOSE IS LIMIT ED TO 12 MONTHS FROM THE DATE OF PURCHASE BY THE USER.
WR 3M Page 21 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Apex, N.C. 27539 Tel: (919) 387-0099 Fax: (919) 387-2379 For inquiries concer ning Technical / Customer Service please call: (800) 476-3030 Ext.
An important point after buying a device Cooper Hand Tools Radio (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cooper Hand Tools Radio yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cooper Hand Tools Radio - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cooper Hand Tools Radio you will learn all the available features of the product, as well as information on its operation. The information that you get Cooper Hand Tools Radio will certainly help you make a decision on the purchase.
If you already are a holder of Cooper Hand Tools Radio, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cooper Hand Tools Radio.
However, one of the most important roles played by the user manual is to help in solving problems with Cooper Hand Tools Radio. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cooper Hand Tools Radio along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
