Instruction/ maintenance manual of the product 6002 Continental Automated Buildings Association
Go to page of 29
Model 6002, 6003, 6004 Unidirectional Widely Spaced Wavelength Div ision Multiplexer (WWDM) Users Manual EdgeAccess Universal Chassis System ®.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual ii Caution! This produ ct is a passiv e device th at may route light em itted by a las er diode operati ng at a waveleng th of 1300nm - 1600nm. Use of optical i nstruments (fo r example: co llimating optics) with this pr oduct may increase eye hazard .
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual iii NOTICE Canoga Perk ins has prepared this user m anual for use by customers and Ca noga Perkins personne l as a guide for the proper installation, opera tion and/o r maintenance of C anoga Perk ins equipment.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual iv Canoga Perkins EdgeAccess ® Universal Chassis System (UCS) Model 6002, 6003, 6004 ( 6002/3/4) Unidir ectional W idely Sp ac.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual v Table of Conte nts Chapter 1 Gener al Overview ......................................................................... 1- 1 1.1 Overv ie w ...................................
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual vi A p pendix A Wa rranty A.1 W arr anty .............................................................................................. A-1 A.1.1 Electronic Products ............
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 1-1 Chapter 1 General O verview 1.1 Overview EdgeAccess ® Models 6002, 6003, 600 4 (6002/3/4) are pass ive, unidirec tional Widely spaced Waveleng th Div ision Multiplexe rs (WWDM) that fit in to the EdgeA ccess Univ ersal Cha ssis System (UCS), or a stand alone enclo sure.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 1-2 1.2 Stand Alone 6002/3/4 M odels The 6002/3/ 4 stand alone m odels are passiv e, non-powered devic es. The models h ave no user configurabl e switches and re quire no m anagement aware con nections.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 2-1 Chapter 2 Set-up and In stallation 2.1 Unpacking and Installing t he Stand A lon e Models Each stand alo ne 6002/3/4 is factory te sted and shipped in protectiv e cartons.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 2-2 2.4 Cabling The 6002/3/ 4 models are p assive, unidir ectional wav elength d ivision multip lexers. Each m odule allows sim ultaneous transmissio n of two to fou r optical s ignals over a s ingle fiber pa ir.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 2-3 2.4.4 Checking Opti cal Power Levels Each 6002/3 /4 model is shipp ed with a docum ent that lists th e specific ou tput power for ea ch local an d remote las er.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 2-4 2.4.6 Measuring Recei ver Input Pow er If the link attenuation is not known, th e Model 6002/3 /4 can be used to m easure the l ink loss or attenuati on. If the link attenuation is already k nown – skip this sec tion.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 3-1 Chapter 3 User Operation 3.1 WWDM A p plication WWDM (wid ely spaced wavele ngth divis ion multiplexe r) models m ultiplex and dem ultiplex wavelengths i n the 1310nm , 1480nm, and 1550nm windows, and are protocol, sp eed, and line code tran sparent.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 3-2 3.2 Operation of the Stand Alone Models To ensure p roper optical performance lev els, you will need t o determine the loss budget. Th is factor w ill ensure link integrity and ample signal strength at the rem ote end of your link .
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 3-3 3.3 Operation of the Rack M ount Models When the 6 002/3/4 RM m odule is installed into the EdgeAcce ss Universa l Chassis System , a “STA” or sta tus LED on the f ront panel w ill illuminate am ber.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 3-4 This Page is Intentionally Left Blank.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 4-1 Chapter 4 Softw are Interaction 4.1 Universal Chassis S ystem Softw are When the rack mount 6002 /3/4 models are p roperly insta lled in a manag ed UCS 1000 Chassis, the DMM module will open the required Hyper T erm inal™ software.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 4-2 Figure 9. Chassis Management Screen Showing Inserted Modules To access inserted modules from the UC S DMM Chassis Manag ement screen : • Press th e SPACE BAR to move the cursor to the desired S lot number ( refer to Figure 9 ).
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 4-3 4.2 Naming the WDM module in a Chassis Confi guration In m any applications, it m ay be benefi cial to nam e the WDM module in the UCS Chassis or the circuit pa th that it is pa rt of.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 4-4 Naming the Chassis / Slot num ber of the in stalled module : • The Modu le Menu scree n will appear, no te the exam ple in Figure 12 show s that the 6002- LightWav e module is in serted into Cha ssis 1, Slot 4.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 5-1 Chapter 5 Troubleshoo ting and Mai ntenance 5.1 Troubleshooting Fiber Opti c Cables All optical cables shou ld be connected u sing a Tx to Rx, o r Rx to Tx orient ation for cor rect MUX and DEMUX sig nal operatio n.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 5-2 5.3 Maintenance The Model 6 002/3/4 is des igned to perform at specif ied perform ance levels. Dam aged fiber cables and di rty connector s are a comm on source of signal loss or link at tenuation.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 6-1 Chapter 6 Specifications 6.1 Single Mode Specification s 6.1.1 Local Channels Data Ra te: Speed transparen t Protocol s: All, no lim itation Fiber: Single m ode (SMF) Optical Connec tor: ST, FC/PC, or SC Duplex APC connectors (spec ial order) 6.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 6-2 6.2 WWDM Model Specification s The Model 6 002/3/4 is av ailable in a v ariety of u ser-specified wav elengths and loss budget configurat ions. All end- to-end loss calc ulations were figured at m aximum loss values.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 6-3 6.2.2 Unidirectional Three Channel WW DM The Model 6 003 is a th ree channel u nidirection al module w ith variou s wavelength configurat ions. Table 3 shows current av ailable model op tions.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual 6-4 This Page is Intentionally Left Blank.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual A-1 A ppendix A Warranty A.1 Warranty A.1.1 Electronic Products Canoga Perk ins warrants to the Customer that all goods s old t.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual A-2 A.1.3 Limitations Other th an those expressl y stated here in, THERE ARE NO OTHER WARRANTIES OF ANY KIND, EXPRESSED OR IMPLIED, AND SPECIFICALLY EX CLUDED BUT NOT BY W AY OF LIMITATION, ARE THE IMPLIED WARRANTIES FOR FITNESS FOR A PARTICULAR PURPOSE AND ME RCHANTABILITY.
EdgeAccess ® Universal Chassi s System 6002/6003/6004 WWDM Users Manual A-3 A.4 Extended Warrant y Policy Canoga Perk ins will, at its fac tory location, repair all de fects occur ring in Canoga Perk.
An important point after buying a device Continental Automated Buildings Association 6002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Continental Automated Buildings Association 6002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Continental Automated Buildings Association 6002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Continental Automated Buildings Association 6002 you will learn all the available features of the product, as well as information on its operation. The information that you get Continental Automated Buildings Association 6002 will certainly help you make a decision on the purchase.
If you already are a holder of Continental Automated Buildings Association 6002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Continental Automated Buildings Association 6002.
However, one of the most important roles played by the user manual is to help in solving problems with Continental Automated Buildings Association 6002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Continental Automated Buildings Association 6002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
