Instruction/ maintenance manual of the product 4(FIT)GY 1 Contec
Go to page of 4
V er .1.00 DIO-4/4(FIT)GY 1 F&eIT Series Isolated Digit al I/O Module DIO-4/4(FIT)GY * S pecifications, color and design of the produ c ts are subject to change without notice. This product is an expansion modu le (device module) that adds digital signal I/O interfaces to one of various types of controllers.
V er . 1.00 DIO-4/4(FIT)GY 2 CAUTION When connecting one of the module s to a control ler module, the internal current consumption should be taken into account. If the total current exceeds the capacity of the power supply unit, the integrit y of the operation cannot be guaranteed.
V er . 1.00 DIO-4/4(FIT)GY 3 How to Connect an Interface Conn ector When connecting the Module to an extern al device, you can use the supplied connector pl ug. T o wire the Module, strip the sheath about 9 - 10mm from an end of the wire and insert the ex posed wire into an ope ning.
V er . 1.00 DIO-4/4(FIT)GY 4 Using Output s Y0 Modu le side Load Outpu t pin (e.g., conn ector Y1) Out put min us commo n Ext er n al powe r su pply 12V - 48VD C + - Output plus c ommon Example of Con.
An important point after buying a device Contec 4(FIT)GY 1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Contec 4(FIT)GY 1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Contec 4(FIT)GY 1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Contec 4(FIT)GY 1 you will learn all the available features of the product, as well as information on its operation. The information that you get Contec 4(FIT)GY 1 will certainly help you make a decision on the purchase.
If you already are a holder of Contec 4(FIT)GY 1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Contec 4(FIT)GY 1.
However, one of the most important roles played by the user manual is to help in solving problems with Contec 4(FIT)GY 1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Contec 4(FIT)GY 1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
