Instruction/ maintenance manual of the product Titan/cPCI Connect Tech
Go to page of 34
Titan/cPCI CompactPCI S erial Comm unications User Manual Connect Tech Inc 42 Arrow Road Guelph, Ontario N1K 1S6 Tel: 519-836-1291 Toll: 800-426-8979 (North America onl y) Fax: 519-836-4878 Email: sales@connecttech.com support@conne cttec h.com URL: www.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 ii Limited Lif etime Warranty Connect Tech Inc. prov ides a Lifetime Warran ty for all Connect Tech Inc. produ cts. Should th is product, in Connect Tech In c.'s opin ion, fa il to be in good work ing order duri ng th e warranty period, Conn ect Tech Inc.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revision 1.0 1 iii Certification St ateme nts Class A Computing Dev ice Titan/cPCI ; Titan/cPCI Rear I/ O; Titan/ cPCI Rear I/O Opto* FCC This equipm ent complie s with the require ments in Part 15 of FCC Rule s for a Class A c omputing de vice .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 iv Table of Conte nts Limited L ifetime Warranty ................................................................................................................. ii Copyrig ht Notice ....
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 v List of Ta bles Table 1: DB-9 cable c onnec tor pi nouts .......................................................................................... ................ 14 Table 2: DB-37 cab le connec tor pino uts .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 1 Introduction Connect Tech’s Titan/cPCI and Titan/cPCI Rear I/O adapters are high perf ormance multi-port serial adapters that all ow you to connect up t o 4 serial devices t hrough one ex pansion slot.
Titan/cPC I User’s Manual, C onnect Tech Inc. 2 Revis ion 1.01 Customer Support Overview If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller f rom which you purchased the produ ct. In most cas es the reseller can help you with product installatio n and difficu lties.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 3 Titan/cPCI Inst allation Ov erview There are two m ain stages in the installation proces s for your Titan/cPCI product: 1. Hardware Ins tallation This involves the physical co nnection of the Titan/cPCI hardware to your system.
Titan/cPC I User’s Manual, C onnect Tech Inc. 4 Revis ion 1.01 Tita n/cPC I Ada pter 2 port mo del Rear I/O Connect or Comp actPC I Bus Con nector PCI 95 4 Quad UART DB-9 Connec tor Port 2 Ejec tor .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 5 Figure 2: Titan/cPCI Model TN004 f or compatibility with 64 bit systems Titan/cPCI TN003 A dapter (front p anel LED s) Rear I/O Connect.
Titan/cPC I User’s Manual, C onnect Tech Inc. 6 Revis ion 1.01 Figur e 4: Titan/ cPCI Rear I /O two and fou r port ada pters J1 J2 J4 Titan/cPCI Rear I/O 2 p ort model J1 J2 J3 Ejector Handle DB-37 .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 7 Figur e 5: Titan/ cPCI Rear I/O Opto two an d four port adapt ers. Ejector Handle Ejector Handle Rear I/O Connector Rear I/O Connector .
Titan/cPC I User’s Manual, C onnect Tech Inc. 8 Revis ion 1.01 You can combine diff erent Titan/cPCI and Titan/cPCI Rear I/O adapters in a s ingle computer to accommodate both small and large multi-channel applications . The figure below repres ents a sampl e configu ration for a sy stem requ iring 10 ports .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 9 Installing the T itan/cPCI adapter in your syst em Titan/cPCI and Rear I/O adapters To install your Titan/cPCI or Rear I/O adapter in y our computer follow these steps: 1. Turn off the power to y our computer.
Titan/cPC I User’s Manual, C onnect Tech Inc. 10 Revis ion 1.01 Configuring the Titan/cPCI Compact Peripheral Com ponent Interconnect (cPC I) bus architecture off ers a feature called Plug and Play (s ometimes referred to as PnP). This featu re automatically identifies and configures inst alled devices each time th e system boots.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 11 Multi-drop Slav e Mode In this mode the TxD line driver is enabled onl y when data is transmitted and RxD is e nabled all the time. This mode is typically used in multi-drop "4 w ire" connections.
Titan/cPC I User’s Manual, C onnect Tech Inc. 12 Revis ion 1.01 A ppendix A : Specifications Operating Environment Storage temperature: -65 ° C to 150 ° C Operating temperature: 5 ° C to .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 13 Surge Suppression Tra ns Gu ar d Transient Voltage Suppression, able to withstand multiple strikes o n every signal of every port.
Titan/cPC I User’s Manual, C onnect Tech Inc. 14 Revis ion 1.01 A ppendix B: Connectors/Pinouts Connector Pinouts Tables 1 a nd 2 outline the pinouts for the Titan/cPCI and Titan/cPCI Rear I/O conn ectors or cable connectors. Technical Tip: Please ensure that you term i nate signals if your appl icat ion does not use them.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 15 Table 2: DB -37 cable con nector pin outs Pin No. Port No. RS-232 Sign al Direct ion RS-422/4 85 Sign al Direct ion 1 1 SG signa l gnd.
Titan/cPC I User’s Manual, C onnect Tech Inc. 16 Revis ion 1.01 Table 3: RJ-45 pinout s – Titan/ cPCI Rear I/O O pto RJ-45 Pin No. DB-9 Pin CABR J4509 RS- 232 Sign al Direct ion RS-422/485 Sign al Direct ion 1 9 N/C no conn ect RTS (-) ou tput 2 1 N/C input RxD (+) input 3 7 RTS output RTS (+) output 4 5 SG sign al ground SR signa l ref.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 17 A ppendix C: Factor y Settings Titan/cPCI Adapters Function Facto r y Set ting Electrical Interface Jumper block JB is set f or all po.
Titan/cPC I User’s Manual, C onnect Tech Inc. 18 Revis ion 1.01 Titan/cPCI Rear I/ O Opto adapters Function Facto r y Set ting Electrical Interface Jumper block s JA, JB, JC, JD are set for all port.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 19 A ppendix D: RS-422/485 Lin e Interface Titan/cPCI adapters Elect ri cal Int erfac e Selection The Titan/cPCI adapter provides jumper sel ectable RS- 232 and RS-422/ 485 electrical interfaces on each port .
Titan/cPC I User’s Manual, C onnect Tech Inc. 20 Revis ion 1.01 Full Duplex Mode (4 wire) By not installing pins on jumper block JA and by using features in our driv er softwa re, you can run the i ndividu al RS-422/485 ports in f ull dupl ex mode. This m ode is ty pically used in point to point R S-422/485 situ ations much like RS-232.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 21 Line Termination You can use jum per blocks JC, JD, JE and JF to term inate and bias TxD ±, R xD ±, RTS ±, and CTS ± on th e indivi dual RS- 422/485 port s throu gh jum per selectable 150 Ω fixed resisto rs.
Titan/cPC I User’s Manual, C onnect Tech Inc. 22 Revis ion 1.01 Example The following example shows the settings on JC, JD, JE a nd JF where RS-422/4 85 port 1 is ter minated on RTS ± and TxD ± , .
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 23 Titan/cPCI Rear I/ O Opto 2 and 4 port adap ters • The four port Rear I/O Opto requires a four port Fro nt I/O Titan to be installed . • The two port Rear I/O Opto requires a two port Front I/O T itan to be installed.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 25 Titan/cPCI Rear I/ O Opt o Electrical Interf ace Sel ection The Titan/ cPCI Rear I/O O pto adapter prov ides jum per selectable R S-232 an d RS-422/485 electrical interfaces on each port .
Titan/cPC I User’s Manual, C onnect Tech Inc. 26 Revis ion 1.01 Full Duplex Mode (4 wire) Ensure J1 and J2 for th e specific port is rem oved. You must also ensure that the conf iguration softwa re does NOT have t he ½ duplex or multi-drop sl ave mode enabled.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 27 TxD TxD + RxD - TxD - RxD + Titan/cPCI Rear I/O Opto RS-422/485 Line Bi as/Termination RxD RTS RTS + CTS - RTS - CTS + CTS PCI 954 UART 150 Ω 1.8K Ω 1.8K Ω +5 V 150 Ω 1.8 K Ω 1.
Titan/cPC I User’s Manual, C onnect Tech Inc. 28 Revis ion 1.01 Example The followi ng example shows the setti ngs on JA, JB, JC and JD where port 1 is ter minated on RTS ± and Tx D ± , the RS-422.
Titan/cPC I User’s Manual, C onnect Tech Inc. Revis ion 1.01 29 RS-422/48 5 Cable Wiri ng You can wi re Titan/cPCI adapt ers in v arious ways to comm unicate with RS- 422/485 peripherals . This section describes a few examples of RS-422/485 cablin g schem es.
Titan/cPC I User’s Manual, C onnect Tech Inc. 30 Revis ion 1.01 Figure 9 depi cts a 2 w ire cabling scheme between a port on the Titan/cPCI adapter to a por t on the RS- 422/485 periph eral.
An important point after buying a device Connect Tech Titan/cPCI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Connect Tech Titan/cPCI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Connect Tech Titan/cPCI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Connect Tech Titan/cPCI you will learn all the available features of the product, as well as information on its operation. The information that you get Connect Tech Titan/cPCI will certainly help you make a decision on the purchase.
If you already are a holder of Connect Tech Titan/cPCI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Connect Tech Titan/cPCI.
However, one of the most important roles played by the user manual is to help in solving problems with Connect Tech Titan/cPCI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Connect Tech Titan/cPCI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
