Instruction/ maintenance manual of the product Pro system CompuSTAR
Go to page of 18
1 WWW.COMPUSTAR.COM This device complies w ith Part 15 of the FCC rules. Opera tion is subject to the following conditions; (1) This device may not cause harmful interference. (2) This device may accept any interference received, including interference tha t ma y cause undesired operation.
T able of Content s Introduction ............................................................................................................................... ................ 3 Kit(s) Contents .......................................................
Introduction Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual.
Remote Reference Remote Reference P2WSHLEDR (2-Way Super Heterodyne) Applicable to the following models; - P2WSHLED-AS (alarm and remote start) - P2WSHLED-A (alarm w/out remote start) - P2WSHLED-S (re.
Quick Reference Quick Reference Valet Mode Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will st i ll lock and unlock power lock systems.
2 Way LED and 1 Way Remote Button Func tions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no 0.5 seconds no Unlock/Disarm 0.5 seconds no Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down).
Remote LED Diagram and Icons Remote LED Diagram and Icons Your remote pager will indicate the status of your vehicle while in range through a series of flash ing LEDs.
pager is in range to receive commands, hold buttons for 2.5 seconds – if the pager LEDs illuminate and beep, the pager is in range to receive commands. Active Lock/Arm and Unlock/Disarm Tap button for 0.5 seconds to lock/arm and unlock/disarm. The icon will flash on your remote.
• The transmission must be left in the neutral position. • The vehicles windows must be rolled up. • The vehicles door pins must be in working order. • Do not install this remote start on a manual transmission vehicle that has a convertible or removable top.
outputs up accordingly. Using auxiliary outputs to control additional vehi cle functions will require additional parts and can be rather labor extensive. Tap button for 0.5 seconds to trigger auxiliary output 1. Tap button for 0.5 seconds to trigger auxiliary output 2.
Default 1: Off Option 2: Locks the doors when the ignition is on and after the brake is depressed. Option 3: locks the doors when the RPM’s have reached two times that of idle speed (this setting requires that a tachometer wire is connected). With both settings, the doors will unlock when the ignition is turned off.
STEP 7: Turn the ignition OFF - the RPS disarm/unlock feature is now programmed. Follow steps 3 – 5 to enter your disarm/unlock code. Secure Valet Switch The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times.
Cold/Hot Start Mode Cold/hot start mode works in conjunction with time r start mode (see above) and the temperature sensor. It allows you to configure your timer start feature to c heck the vehicles temperature prior to starting. All of these options require programming from your local CompuStar dealer.
Remote S t art Error Diagnostic gnostic If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. Following those three flashes the parking lights will flash again correspo nding to the error table. If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately.
Limited Lifetime W arranty Firstech, LLC Warrants to the original purchaser that this product shall b e free of defects in material and workmanship under normal use and circumstances for the period of.
Notes: ___________________________________________________________________________________ ___________________________________________________________________________________ _________________________.
___________________________________________________________________________________ ___________________________________________________________________________________ ________________________________.
www.compustar.com Toll Free: 888-820-3690 21911 68 th Ave S Kent, WA 98032 18.
An important point after buying a device CompuSTAR Pro system (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CompuSTAR Pro system yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CompuSTAR Pro system - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CompuSTAR Pro system you will learn all the available features of the product, as well as information on its operation. The information that you get CompuSTAR Pro system will certainly help you make a decision on the purchase.
If you already are a holder of CompuSTAR Pro system, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CompuSTAR Pro system.
However, one of the most important roles played by the user manual is to help in solving problems with CompuSTAR Pro system. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CompuSTAR Pro system along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
